Models > GW4500

GW4500 Campbell Hausfeld Welder

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for GW4500

Viewing 1 of 1
Page A Diagram and Parts List for Campbell Hausfeld Welder
Page A
Keep searches simple, eg. "belt" or "pump".
Dinse Plug – Part Number: WC000200AV
This is a genuine OEM part that has been sourced directly from Campbell Hausfeld. Dinse plugs are found at the end of the welding cables that connect the electrode holder and the ground clamp to a gen...
No Longer Available
Isomount - Angle (Short) – Part Number: GN004405AV
This is an authentic OEM part that has been sourced directly from Campbell Hausfeld. This short angle isolation mount is located on the frame of the generator. This mount is used to help secure the ti...
No Longer Available
Ground Clamp – Part Number: WC100100AV
This is a genuine OEM part that has been sourced directly from Campbell Hausfeld. This spring loaded ground clamp, also known as a work clamp is connected to the material being welded. Not only is gro...
No Longer Available
Isomount – Part Number: GN004401AV
No Longer Available
Circuit Breaker - 25A, 250V – Part Number: GN003601AV
No Longer Available
Dinse Socket - 200A – Part Number: WC000300AV
No Longer Available
Electrode Holder – Part Number: WC200200AV
No Longer Available
Capacitor - 35Mf, 450V – Part Number: GW001016SV
No Longer Available
Diode, Suppressor, Capacitor Kit (2 Each – Part Number: GN002337SJ
No Longer Available
Isomount - Angle (Extended) – Part Number: GN004406AV
No Longer Available
Commutator Knob - Small – Part Number: WC400401AV
No Longer Available
Warning Decal – Part Number: DK689201AV
No Longer Available
View More

Questions and Answers

Be the first to ask our experts a question about this part!