Models
>
GXSF39B01
GXSF39B01 General Electric Water Softener
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for GXSF39B01
Viewing 2 of 2Manuals & Guides for GXSF39B01
Click to downloadKeep searches simple, eg. "belt" or "pump".
In Stock
Order within the next 12 hrs and your part ships today!
In Stock
Order within the next 12 hrs and your part ships today!
Used with Water Softeners.
This motor has a timer that allows the water softener to go through its various cycles.
No Longer Available
Special Order
In Stock
Order within the next 12 hrs and your part ships today!
Special Order
In Stock
Order within the next 12 hrs and your part ships today!
In Stock
Order within the next 12 hrs and your part ships today!
In Stock
Order within the next 12 hrs and your part ships today!
In Stock
Order within the next 12 hrs and your part ships today!
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for GXSF39B01
Viewing 1 of 1Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
-
Customer:edward from perkasie, PA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers, Wrench (Adjustable)
watersoftener was leaking at the union of the manifold and the unit
water softener was leaking due to a broken clip. turned off water and drained the pipes. some how managed to remove the broken clip from the inlet side. i than was able to remove the good clip from the outlet side, without breaking it. i replaced the washer on the leaking side, cleaned and resealed all the joints. finally i reattached the manifold to the water softener. no leaks so far. next time i will discarge the unit before repair.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:jeff from lombard, IL
-
Parts Used:WS26X10011
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
Broken gear box on motor
Very fast and easy.
Thank you for the quick shipping.
Wife very happy the water softener was back in action in 2 days.
Thank you for the quick shipping.
Wife very happy the water softener was back in action in 2 days.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Mike from Princeton, MN
-
Parts Used:WS26X10011
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Screw drivers
water softener would continually rinse but not shut off
I removed three screws that held the motor assembly in and unhooked two wires.
Was this instruction helpful to you?
Thank you for voting!