Models
>
GEH50DNSRSA
GEH50DNSRSA General Electric Water Heater
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for GEH50DNSRSA
Viewing 3 of 3
Manuals & Guides for GEH50DNSRSA
Click to downloadInstall
Installation Instructions
(5.4MB)
Manual
Owner's Manuals
(7.17MB)
Specs
Product Specifications Sheet
(0.41MB)
Keep searches simple, eg. "belt" or "pump".
Special Order
Special Order
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Richard from WETUMPKA, AL
- Parts Used:
- WS51X20161
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
Bottom element in water heater was burned out.
Bottom element in water heater was burned out. I confirmed this with a continuity test. But, I purchased both elements so I changed them both out at the same time. Figured it would save time in the long run. I turned off the electricity, drained the water heater, and removed the elements. Replaced them by getting the elements started wit
... Read more
h the pliers and after catching a couple of threads, I used the Element Tool and got the elements tight. Reconnected the wires on each (order of wiring did not matter), turned the water back on to check for leaks, and when no leaks occurred I simply put all insulation back in place, replaced the covers and turned the power back on. I had HOT water in an hour or less.
Read less
Was this instruction helpful to you?
Thank you for voting!