GNUL30B01 General Electric Water Filter System - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Dennis from Burke, VA
- Parts Used:
- WS03X10001
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
O-ring on my under-the-sink water filter had broken
I simply replaced the old O-ring; rubbed a bit of petroleum jelly around the seal and rescrewed the filter cannister back in place. It was easy, and worked like a charm!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- james from dearborn, MI
- Parts Used:
- FXULC
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
Change filter
Finally got it apart and job done, changed water filter
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Alameda, CA
- Parts Used:
- FXUSC
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Wrench set
water filter cartridge over a year old, needed changing
With this whole house water filter in line with the water heater line, I could see the filter was dirty because of the clear water filter housing and the original filter was white. I used a manufacturer supplied spanner wrench and turned off the water first, then unscrewed the filter housing and replaced with the new white filter cartridge, then re-installed the cartridge housing. The old one was visibly full of dirt because it was nearly black with sediment. I like the original equipment cartridge because it is white, other charcoal filters are black so you can't tell when they are full of dirt.
Was this instruction helpful to you?
Thank you for voting!