The washer drive pulley kit is also known as a replacement clutch assembly, or a cam kit. The drive pulley is found at the bottom of your washing machine, mounted to the drive shaft. Common symptoms i...
The drive belt works with the pulley in your washer in order to spin the tub. If you notice a burning rubber smell, your washer has become excessively noisy, or it will not spin, it could indicate an ...
This is a multi-use screw and can be used on a variety of appliances. The measurements of the screw are: 8/18 x 3/8. *Please note: the screw is sold individually. Refer to the manual provided by the m...
This is a genuine OEM door lock assembly for a top load washing machine. This part is also known as a door switch, and it is used to communicate whether the door to the washer is opened or closed. If ...
If your washer shakes or makes loud noises during a cycle, this suspension rod kit could help. It comes with four rods that keep the tub steady and reduce movement. Easy to install and compatible with...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
If your washer is leaking, will not fill with water, or will not stop filling, there may be an issue with your water inlet valve. This part is used to control the flow of hot and cold water into the w...
This 6-pin shift actuator controls the washer’s transmission, allowing it to switch between agitating and spinning. It’s a common fix for washers that won’t spin, get stuck mid-cycle, or make odd nois...
This washing machine cleaner includes three time-release tablets designed to remove odor-causing residues, grime, and buildup from high-efficiency and top-load washing machines. The tablets work by cl...
In Stock
Order now and your part arrives by Jun 4
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Scottie
July 3, 2022
My hot water still runs in tub when not in use. It stops when you turn water off at wall
For model number WTW4815EW1
Hello Scottie, Thank you for your inquiry. We have researched the model number you have provided and would recommend checking the water inlet valve, the water level pressure hose, the door lock assembly, and the electronic control board (as the pressure hose hooks into this part). Check the board for any visible damage or loose connections, and check the hose for any visible damage and make sure it is attached securely. You can test the other two parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Washer stops at the start of rinse cycle. Wash cycle works and drains wash water and stops about 6 seconds into rinse cycle.
For model number WTW4815EW1
Hello Ken, thank you for the question. We would recommend checking the Control Board, part number FIX12347391, and the Selector Switch, part number FIX11752017. A malfunctioning switch or control board can make your washer not rinse at all. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!
I need to replace the metal core motor coupling kit on my washer. What is the part number on your site. Can't seem to find it on the diagrams
For model number WTW4815EW1
Hi Noel, thank you for reaching out. Based on our research, your motor is not a direct drive motor. It does not need a metal-core motor coupling kit. Your issue can be resolved by replacing the drive motor, part number FIX11765708. We hope this information helps!
Washer goes into drain mode and will not pause or stop, have to unplug to stop it. When plugged back in it goes into drain mode. No water in tub.
For model number WTW4815EW1
Hello Rick, thank you for your question. Based on the information given, the Electronic Control Board FIX12347391 may need to replaced. We hope this helps.
Well, first investigated and found loose nut on drive clutch. First take off the two screws with nut drive then cover off using a screwdriver blade to snap off the cover. Then socket ratchet to take off the nut on drive clutch. take off belt by slowly rotating the drive gear. two screws that hold the electronics to the upper drive clutch
... Read moreand put aside, so you can snap off the cover for drive clutch on upper part with screwdriver and off the parts come and install whole unit back as took it apart. Line up the new upper clutch so that is position as was before. (Using parts diagram helps a lot as www. partsselect.com has for you or Maytag.com.) Then put the electronic part board back on and the gear and nut. Make sure it is tight by several attempts to make sure it's snugged up good and then slowly roll belt back on the pulley and motor drive. Put your cover guard back on with two screws and done.
