The washer drive pulley kit is also known as a replacement clutch assembly, or a cam kit. The drive pulley is found at the bottom of your washing machine, mounted to the drive shaft. Common symptoms i...
The drive belt works with the pulley in your washer in order to spin the tub. If you notice a burning rubber smell, your washer has become excessively noisy, or it will not spin, it could indicate an ...
This is a multi-use screw and can be used on a variety of appliances. The measurements of the screw are: 8/18 x 3/8. *Please note: the screw is sold individually. Refer to the manual provided by the m...
If your washing machine is shaking, noisy, or moves while operating, you may need to replace the suspension rod supports. These supports are used to secure the suspension rods, which help ensure that ...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This part is the replacement lid latch or latch assembly for your top-load washer. The lid latch holds your washer door closed, and allows the washer to run its cycle. If the lid latch is damaged, you...
This drive block connects the spin basket to the drive shaft in large-capacity washers, allowing proper spinning during cycles. At 2-5/16 inches high, it’s easy to install with basic tools. Replace if...
This drain pump helps remove water from the washer during the drain cycle. It’s a durable replacement for top-load models from Whirlpool and related brands. If your washer won’t drain, leaks, or makes...
The drain hose carries used water from the washer to your house drain.
In Stock
Order now and your part arrives by Mar 19
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Paul
June 20, 2023
It powers on but all the cycle status lights come on and lid lock light. It’s non responsive, it will not let me go into diagnostic mode. I’ve tried unplugging and letting reset
For model number CAE2743BQ0
Hi Paul, thank you for reaching out. If the lid lock light is on, it could indicate a problem with the lid lock mechanism. It appears that your washer may have a damaged lid latch, part number FIX11755478. Let us know if you have further questions!
Hello Paul, Thank you for writing. To answer that we will need to know what happens when you try to go into diagnostic mode. To go into diagnostic model, Rotate cycle selector knob counterclockwise one click and wait ½ second. Rotate cycle selector knob clockwise one click and wait ½ second. Rotate cycle selector knob clockwise one click and wait ½ second. Rotate cycle selector knob counterclockwise one click and wait ½ second. Rotate cycle selector knob clockwise one click. Successful activation of Diagnostic Test Modes will be indicated by all status LEDs (except for Lid Locked)flashing ON and OFF in half-second intervals. NOTE:LED names may vary between makes and models. We hope this helps!
Was this helpful?
Thank you for voting!
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Well, first investigated and found loose nut on drive clutch. First take off the two screws with nut drive then cover off using a screwdriver blade to snap off the cover. Then socket ratchet to take off the nut on drive clutch. take off belt by slowly rotating the drive gear. two screws that hold the electronics to the upper drive clutch
... Read moreand put aside, so you can snap off the cover for drive clutch on upper part with screwdriver and off the parts come and install whole unit back as took it apart. Line up the new upper clutch so that is position as was before. (Using parts diagram helps a lot as www. partsselect.com has for you or Maytag.com.) Then put the electronic part board back on and the gear and nut. Make sure it is tight by several attempts to make sure it's snugged up good and then slowly roll belt back on the pulley and motor drive. Put your cover guard back on with two screws and done.
