Models
>
WFW6720RR0
WFW6720RR0 Whirlpool Washer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for WFW6720RR0
Viewing 6 of 6
Keep searches simple, eg. "belt" or "pump".
$7.60
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
In Stock
Order now and your part arrives by Apr 9
This insert is sold individually. Knob not included. Knob is sold separately.
In Stock
Order now and your part arrives by Apr 9
This washing machine cleaner includes three time-release tablets designed to remove odor-causing residues, grime, and buildup from high-efficiency and top-load washing machines. The tablets work by cl...
Special Order
In Stock
Order now and your part arrives by Apr 9
$9.79
This clamp helps to prevent leaking by holding the end of water hose in place.
In Stock
Order now and your part arrives by Apr 9
$8.70
Note: This part has been updated by the manufacturer. It may appear different but will still function the same as the original.
In Stock
Order now and your part arrives by Apr 9
In Stock
Order now and your part arrives by Apr 9
$68.99
This stacking kit allows compatible front-load washer and dryer models to be stacked vertically. It is designed to maximize laundry space and can be used on various models. Please use your model numbe...
In Stock
Order now and your part arrives by Apr 9
$75.36
Ensure optimal water flow in your washing machine with this double water inlet valve, engineered for consistent performance across multiple appliance brands. It controls the entry of hot and cold wate...
In Stock
Order now and your part arrives by Apr 9
This Affresh Washing Machine Cleaner deep cleans to help remove the odor-causing residues and grime that daily loads leave behind. The time-release tablets are EPA Safer Choice certified, septic-safe ...
In Stock
Order now and your part arrives by Apr 9
In Stock
Order now and your part arrives by Apr 9
$75.36
This water inlet valve controls the flow of hot and cold water into your washing machine. It’s a genuine replacement part for many Whirlpool models and helps solve issues like slow filling or leaks. I...
In Stock
Order now and your part arrives by Apr 9
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for WFW6720RR0
Viewing 7 of 7Leaking
Fixed by these parts
How to fix it
Water Filling Issues
Fixed by these parts
How to fix it
Lid or door won’t close
Fixed by these parts
How to fix it
Does not dispense fabric softener or detergent
Fixed by these parts
How to fix it
Locking Issues
Fixed by these parts
How to fix it
No hot or cold water
Fixed by these parts
How to fix it
Timer Not Working
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Frederick from OSWEGO, NY
- Parts Used:
- W11688995
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver
Fabric Softener dispenser would not drain out
Replaced the Whirlpool washer water inlet valve.
1. Unplug washer
2. Close Hot and Cold water valves
3. Remove top cover of the machine by taking out 3 screws in the top back. Slide top back and remove.
4. Water Inlet Valve is located on the back left side, remove tubing using a nutdriver to loosen the hose clamps.
... Read more />5. Water Inlet Valve is removed by removing the screw in the back of the valve and turning the valve clockwise a little.
Replace with the new one, connect hoses, put cover back on, open valves, plug it in.
6. Ran washer and Fabric Softener dispenser now works
1. Unplug washer
2. Close Hot and Cold water valves
3. Remove top cover of the machine by taking out 3 screws in the top back. Slide top back and remove.
4. Water Inlet Valve is located on the back left side, remove tubing using a nutdriver to loosen the hose clamps.
... Read more />5. Water Inlet Valve is removed by removing the screw in the back of the valve and turning the valve clockwise a little.
Replace with the new one, connect hoses, put cover back on, open valves, plug it in.
6. Ran washer and Fabric Softener dispenser now works
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Larry from HICKORY, NC
- Parts Used:
- WP8536939
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
The main knob insert snapped.
Nothing to it. Just remember to put the insert in the knob, NOT on the selector stem. Line up the flat part of the insert with the flat part of the stem and push the knob in place.
Don NOT ram it on the selector stem. When it's seated, don't push any more. That's all there is to it. It works. If the pointer on the knob indicat ... Read more es the selector is lined up correctly, but it isn't, the problem is the selector, not the knob.
Don NOT ram it on the selector stem. When it's seated, don't push any more. That's all there is to it. It works. If the pointer on the knob indicat ... Read more es the selector is lined up correctly, but it isn't, the problem is the selector, not the knob.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Amber from PICKERINGTON, OH
- Parts Used:
- W11688995
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers, Socket set
The hot and cold water flow was slow.
1. First I unplugged the machine.
2. Then I turned off the hot and cold water supply valves.
3. With a towel ready to catch the water, I used channel locks to unscrew the water supply hose from the valve in the back of the machine.
4. Next with 1/4" socket I removed the three screws at the top rear of the machine securing t ... Read more he top cover plate. You could also use a T20 driver.
5. Then I slid the top plate back about an inch and lifted it up to remove it from the machine, being careful with the sharp edges of the plate.
6. Then using my fingers I unclipped the electrical connections to the valve, taking note of how they attached.
7. Warning: I wish someone had told me this! Have a small towel ready to catch any water from the valve hose inside the machine so as not to get any electrical parts wet! I got the machine wet and had to wait a few days to let it dry before it would run water instead of just making a buzzing sound. Luckily it did work again. So with that in mind, I took pliers and squeezed the hose clamp to loosen it and slid it down over the hose.
8. Then using a flathead screwdriver I carefully worked around the hose and pried the hose off of the valve. Again have a small towel ready for the hose to drain onto!
9. Once the hose is drained, I removed the screw on the back of the machine that secured the valve to the machine. I don't remember if it is T20 or Phillips screw.
10. Then I turned the old valve counter clockwise a quarter turn (using channel locks to help me) to release the valve from the two metal tabs holding it in place.
11. I then pulled the old valve out and put the new one in following these steps in reverse order.
12. Don't forget to turn the water back on and plug the machine in! Not that I would ever do such a thing...
2. Then I turned off the hot and cold water supply valves.
3. With a towel ready to catch the water, I used channel locks to unscrew the water supply hose from the valve in the back of the machine.
4. Next with 1/4" socket I removed the three screws at the top rear of the machine securing t ... Read more he top cover plate. You could also use a T20 driver.
5. Then I slid the top plate back about an inch and lifted it up to remove it from the machine, being careful with the sharp edges of the plate.
6. Then using my fingers I unclipped the electrical connections to the valve, taking note of how they attached.
7. Warning: I wish someone had told me this! Have a small towel ready to catch any water from the valve hose inside the machine so as not to get any electrical parts wet! I got the machine wet and had to wait a few days to let it dry before it would run water instead of just making a buzzing sound. Luckily it did work again. So with that in mind, I took pliers and squeezed the hose clamp to loosen it and slid it down over the hose.
8. Then using a flathead screwdriver I carefully worked around the hose and pried the hose off of the valve. Again have a small towel ready for the hose to drain onto!
9. Once the hose is drained, I removed the screw on the back of the machine that secured the valve to the machine. I don't remember if it is T20 or Phillips screw.
10. Then I turned the old valve counter clockwise a quarter turn (using channel locks to help me) to release the valve from the two metal tabs holding it in place.
11. I then pulled the old valve out and put the new one in following these steps in reverse order.
12. Don't forget to turn the water back on and plug the machine in! Not that I would ever do such a thing...
Read less
Was this instruction helpful to you?
Thank you for voting!