Models > WFW560CHW3 > Instructions

WFW560CHW3 Whirlpool Washer - Instructions

Jump to:

All Instructions for the WFW560CHW3
1 - 4 of 4
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
James from PINE MOUNTAIN, GA
Parts Used:
8212641RP
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Washer hoses due for replacement
Replaced each hose. Did discover that either hose can be used for hot or cold water lines. No longer required to label hot and cold replacement hoses.
3 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
brian from FUQUAY VARINA, NC
Parts Used:
W10882520
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
no problem just the wait for the part oct to dec.
putting the kit-stack was easy to put together
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Nelson from Middletown, NY
Parts Used:
W10869845
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
Washer Would Drain But Not Spin
Removed rear cover (6 screws) unpluged harness from motor control and removed same. Replaced motor control reinstalled harness. Replaced rear cover. Parts used motor control board.
0 of 30 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the WFW560CHW3
1 - 4 of 4