The washer drive pulley kit is also known as a replacement clutch assembly, or a cam kit. The drive pulley is found at the bottom of your washing machine, mounted to the drive shaft. Common symptoms i...
The drive hub connects the basket of your washer to the transmission shaft, which in turn allows the basket to spin. If your washer will not agitate, spins slowly, or is excessively noisy, it may requ...
This is a multi-use screw and can be used on a variety of appliances. The measurements of the screw are: 8/18 x 3/8. *Please note: the screw is sold individually. Refer to the manual provided by the m...
This is a genuine OEM door lock assembly for a top load washing machine. This part is also known as a door switch, and it is used to communicate whether the door to the washer is opened or closed. If ...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This 6-pin shift actuator controls the washer’s transmission, allowing it to switch between agitating and spinning. It’s a common fix for washers that won’t spin, get stuck mid-cycle, or make odd nois...
This agitator is for washers.
Agitator rotates back and forth to move the clothes inside the tub to clean the load.
Unplug the washer before installing this part. Wear work gloves to protect your hands.
This washing machine cleaner includes three time-release tablets designed to remove odor-causing residues, grime, and buildup from high-efficiency and top-load washing machines. The tablets work by cl...
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Belen
February 27, 2024
Washer wont start wash cycle after Auto-sensing load. Green light stays on (wash cycle) but wont advance
For model number WTW4955HW2
Hi Belen,
Thank you for your question. If the washer will not start, try unplugging it for a few minutes to do a hard reset to see if this will resolve the issue. If the issue still occurs, we would recommend checking the lid switch, the strike, and the shift actuator. We hope this helps!
Washer will run through full wash but it keeps trying to drain when cycle is finished
For model number WTW4955HW2
Hi Tausha,
Thank you for your question. If the washer starts to drain when the cycle is finished, the drain hose is too far down in the standpipe. This causes a siphoning effect. The drain hose should be only be placed about 5 inches down in the standpipe. We hope this helps!
Was this helpful?
Thank you for voting!
Kera
May 10, 2023
Washer not draining
For model number WTW4955HW2
Hello Kera, thank you for contacting us. Based on our research, you may need to replace the drain pump, part number FIX11770076, to fix the issue. Before replacing the drain pump, you may need to check the drain hose to ensure that it is not clogged. We hope this solves your problem!
ordered hub and it shipped quickly. I was able to put the hub in place and screw the screws in. you want to tighten them down slowly and go around to each screw tightening a little at a time so you don't break the hub. as you tighten the screws down the hub slides down flush. its impossible to just push the hub on with your hand. Buttoned
... Read more it back up and got caught up on laundry. good day when the washer is fixed.
Replaced the gears that were eaten up, the retainer and the actuated. All parts but the spring are plastic. Did all according to your instructions. Happy to report all went well. Washer is working again.
