The washer drive pulley kit is also known as a replacement clutch assembly, or a cam kit. The drive pulley is found at the bottom of your washing machine, mounted to the drive shaft. Common symptoms i...
In Stock
Order within the next 12 hrs and your part ships today!
The drive hub connects the basket of your washer to the transmission shaft, which in turn allows the basket to spin. If your washer will not agitate, spins slowly, or is excessively noisy, it may requ...
In Stock
Order within the next 12 hrs and your part ships today!
This is a multi-use screw and can be used on a variety of appliances. The measurements of the screw are: 8/18 x 3/8. *Please note: the screw is sold individually. Refer to the manual provided by the m...
In Stock
Order within the next 12 hrs and your part ships today!
This is a genuine OEM door lock assembly for a top load washing machine. This part is also known as a door switch, and it is used to communicate whether the door to the washer is opened or closed. If ...
In Stock
Order within the next 12 hrs and your part ships today!
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
In Stock
Order within the next 12 hrs and your part ships today!
Order within the next 12 hrs and your part ships today!
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ron
February 1, 2024
Yes I replace the water inlet now I'm trying to recalibrate it and none of the lights come on
For model number WTW5000DW3
Hi Ron, thank you for reaching out. Based on the description, we would recommend unplugging the unit and plug it in back after 5 minutes. If this does not solve the issue, then you have an issue with the control board, part number FIX12745506, and needs to be replaced to fix the issue. We hope this helps.
Yeah I replaced control panel now the sensing lights on the water goes into the tub and right out to the drain tube what would cause that
For model number WTW5000DW3
Hello Ron, thank you for your question. Our research team says the part you would need to resolve this issue is the Electronic Control FIX12745506. This part manages the washer's functions such as filling, washing, draining and spinning. We hope this helps.
Washer shakes uncontrollably in spin cycle I have replaced suspension rods this did not make it any better
For model number WTW5000DW3
Hello Basil, thank you for your question. We suggest a Drive Block Fix6012095. If it's loose or broken the agitator can wiggle back and forth during spin and cause vibration. We have a video for you to view for installation information. We hope this helps.
My washer keeps filling all the way up with water (on any setting) and won't shut off like it's suppose to. (Ex: my normal setting, the water suppose to fill the drum up 1/4 away and shut off and start washing but fills up all the way up like I put it on ex-large load setting). I replaced the washer water inlet valve and that didn't fix it.
For model number WTW5000DW3
Hello Andrew, thank you for contacting us. We believe your washer is having this problem because of the faulty control board. We would recommend replacing the control board, part number FIX12745506, to fix the issue. It manages the washer's functions such as filling, washing, draining and spinning. We hope that helps!
ordered hub and it shipped quickly. I was able to put the hub in place and screw the screws in. you want to tighten them down slowly and go around to each screw tightening a little at a time so you don't break the hub. as you tighten the screws down the hub slides down flush. its impossible to just push the hub on with your hand. Buttoned
... Read more it back up and got caught up on laundry. good day when the washer is fixed.
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.