Models
>
WF56H9110CW
WF56H9110CW (A2-0001) Samsung Washer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for WF56H9110CW
Viewing 7 of 7
Keep searches simple, eg. "belt" or "pump".
On Order
On Order
$57.11
Shipping bolts are installed through the back of the washing machine, and hold the wash tub and basket in place while your washer is being transported. The tub suspension holds the tub correctly in pl...
In Stock
Order now and your part arrives by Jul 24
On Order
In Stock
Order now and your part arrives by Jul 24
In Stock
Order now and your part arrives by Jul 24
In Stock
Order now and your part arrives by Jul 24
$162.83
The drain pump removes water from the washer during the drain portion of the cycle.
In Stock
Order now and your part arrives by Jul 24
In Stock
Order now and your part arrives by Jul 24
$6.51
This manufacturer-approved screw is for refrigerators, including Kenmore refrigerator model. Avoid cross-threading refrigerator screw during installation.
In Stock
Order now and your part arrives by Jul 24
On Order
$45.53
This filter traps debris to protect the pump and maintain proper drainage. Clogs cause slow draining or standing water. Replacement ensures smooth water flow and prevents pump strain.
In Stock
Order now and your part arrives by Jul 24
Common Problems and Symptoms for WF56H9110CW
Viewing 6 of 6Shaking and Moving
Fixed by these parts
How to fix it
Will not drain
Fixed by these parts
How to fix it
Leaking
Fixed by these parts
How to fix it
Lid or door won’t close
Fixed by these parts
How to fix it
Water Filling Issues
Fixed by these parts
How to fix it
Spinning Issues
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Thomas from Leesburg, FL
- Parts Used:
- DC67-00244A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The drain hose disappeared.
The new hose arrived without a plug, so I found a golf tee that fit securely.
I put a few drops of dish soap on the machine end and it slid on with a little resistance.
I ran a few light cycles, and the leak has stopped.
Thank you
I put a few drops of dish soap on the machine end and it slid on with a little resistance.
I ran a few light cycles, and the leak has stopped.
Thank you
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Samuel from NEEDVILLE, TX
- Parts Used:
- DC60-40137A
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Nutdriver, Screw drivers, Socket set, Wrench set
Washer making noise a snow smoking.
Take pics every step, easier re-assembly. Dismantled washer keeping bolt/screw section removed compartmentalized in a tackle box in the order of removal. Replaced drum support, bearings, seal, old blots. Too much to write but I was able to do it all in about 4 hours once all the parts finally came in.
Was this instruction helpful to you?
Thank you for voting!