Models > MVWX655DW1

MVWX655DW1 Maytag Washer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for MVWX655DW1

Viewing 6 of 6
Keep searches simple, eg. "belt" or "pump".
The drive belt works with the pulley in your washer in order to spin the tub. If you notice a burning rubber smell, your washer has become excessively noisy, or it will not spin, it could indicate an ...
In Stock
The washer drive pulley kit is also known as a replacement clutch assembly, or a cam kit. The drive pulley is found at the bottom of your washing machine, mounted to the drive shaft. Common symptoms i...
In Stock
If your washing machine is shaking, noisy, or moves while operating, you may need to replace the suspension rod supports. These supports are used to secure the suspension rods, which help ensure that ...
In Stock
The drive hub connects the basket of your washer to the transmission shaft, which in turn allows the basket to spin. If your washer will not agitate, spins slowly, or is excessively noisy, it may requ...
In Stock
In Stock
This is a genuine OEM door lock assembly for a top load washing machine. This part is also known as a door switch, and it is used to communicate whether the door to the washer is opened or closed. If ...
In Stock
$10.72
This hose clamp is sold individually.
In Stock
$7.68
This gray and white washer lid bumper contains a rubber bottom and is sold individually.
In Stock
$123.77
This wash plate is for washers Unplug the washer and shut off the water supply before installing this part
In Stock
$15.71
Sold individually.
In Stock
$103.02
In Stock
Questions and Answers

Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

10 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Abraham
July 30, 2022
Are the gears supposed to be noisy like they are breaking?
For model number MVWX655DW1
Hello Abraham, thank you for your question. It may be that the Drive Hub Kit PS6012095 needs to be replaced. You had mentioned gears, we do have the gearcase as well, showing as part PS16220911. We have a videos for you to access. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
play video

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Additional Links:
Michael
January 7, 2023
Filter advice. I understand this model does have a lint filter but it does not appear to have been designed to need cleaning since access requires major disassembly to access the filter. Yesterday while washing a blanket it disintegrated into tiny pieces so my first thought was to clean a filter, then started looking for a lint filter. There is no agitator so i suspect everything washed through since full cycle was completed and the other items were basically dry as normal. So my question is does this filter get cleaned or simply replaced, and what are the consequences of lint going through the filter. Does it drain out or is there something else it can affect?Thanks,
For model number MVWX655DW1
Hi Michael, Thank you for your question. There is a lint filter listed for your washer. The part number listed under your model number for the lint filter is FIX11750500. The filter is under the basket in the bottom of the outer tub assembly. You will need to remove the basket and agitator to get to the filter. The filter is held in place by screws. If the filter is nor cleaned, then water will not drain properly from the washer and your clothes will be full of lint. It should be cleaned or replaced. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Jerold
January 13, 2023
It keeps repeating the spin cycle
For model number MVWX655DW1
Hello Jerold, thank you for contacting us. Please clean the drain hose and check the drain pump, part number FIX11738156, to ensure that the washer is draining properly. If it is draining and still repeating the spin cycle, the issue is probably related to a faulty control board, part number FIX12114298. Customer service is available 7 days a week if you require assistance placing an order. Thanks again for reaching out!

Was this helpful?
Thank you for voting!
Related Parts:
Chase
28 days ago
Why does my washer stay at washing mode, and not go into spin cycle.
For model number MVWX655DW1
Hi Chase, thank you for contacting us. We would recommend checking the Drain Pump, part number FIX11738156. The drain pump removes water from the washing machine tub at the end of the wash cycle. If the drain pump fails, then the washer will not sense that the tub is empty and may not advance to the next stage of the cycle. We would also suggest checking the Cold Water Valve, part number FIX12348073, and the Hot Water Valve, part number FIX12348074. Verify that the inlet hoses do not have any kinks or restrictions and that the inlet screens are clean. If these are ok, then you can check the continuity of the solenoids with a multimeter. If this does not solve the problem, the issue might be with the Main Control Board, part number FIX12114298. We hope this solves your problem.

Was this helpful?
Thank you for voting!
Related Parts:
Abraham
July 30, 2022
Where is the filter for cleaning?
For model number MVWX655DW1
Hello Abraham, Thank you for the question. The Filter is part of the outer tub and is located at the bottom of the Tub. You will need to remove the inner basket to access the filter. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Related Parts:

Common Problems and Symptoms for MVWX655DW1

Viewing 15 of 15
Will not agitate
Fixed by these parts
How to fix it
Noisy
Fixed by these parts
How to fix it
Shakes and moves
Fixed by these parts
How to fix it
Pumps but will not spin
Fixed by these parts
How to fix it
Leaking
Fixed by these parts
How to fix it
Spins slowly
Fixed by these parts
How to fix it
Will not drain
Fixed by these parts
How to fix it
Lid or door won’t close
Fixed by these parts
How to fix it
Will not stop filling with water
Fixed by these parts
How to fix it
Burning smell
Fixed by these parts
How to fix it
Will Not Start
Fixed by these parts
How to fix it
Lid or door will not open
Fixed by these parts
How to fix it
Will not fill with water
Fixed by these parts
How to fix it
Timer will not advance
Fixed by these parts
How to fix it
Does not dispense fabric softener or detergent
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
  • Customer:
    Jerry from WALLA WALLA, WA
  • Parts Used:
    WPW10006384, W10721967
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
Noise on bottom of Washer louder as time went on. 1 1/2 years
Well, first investigated and found loose nut on drive clutch. First take off the two screws with nut drive then cover off using a screwdriver blade to snap off the cover. Then socket ratchet to take off the nut on drive clutch. take off belt by slowly rotating the drive gear. two screws that hold the electronics to the upper drive clutch and put aside, so you can snap off the cover for drive clutch on upper part with screwdriver and off the parts come and install whole unit back as took it apart. Line up the new upper clutch so that is position as was before. (Using parts diagram helps a lot as www. partsselect.com has for you or Maytag.com.) Then put the electronic part board back on and the gear and nut. Make sure it is tight by several attempts to make sure it's snugged up good and then slowly roll belt back on the pulley and motor drive. Put your cover guard back on with two screws and done.
68 of 89 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Joseph from PERKINS, GA
  • Parts Used:
    W10440729
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
Washer was off balance during spin cycle. The suspension piece broken.
Replaced 1 of 4 of the suspension bushing. Works great.
59 of 82 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Michelle from Richardson, TX
  • Parts Used:
    72017
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
Scratches in Surface
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
46 of 76 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!