Models
>
MFS25PDFTS
MFS25PDFTS Maytag Washer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for MFS25PDFTS
Viewing 12 of 12Manuals & Guides for MFS25PDFTS
Click to downloadKeep searches simple, eg. "belt" or "pump".
$8.04
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
In Stock
In Stock
$9.81
Note: This part has been updated by the manufacturer. It may appear different but will still function the same as the original.
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for MFS25PDFTS
Viewing 1 of 1Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Steve from Geneva, FL
- Parts Used:
- WPW10300599
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Screw drivers, Socket set
No water pressure
I cut the breaker and disconnected the in and out water lines, then removed the washer. Once on its side, I took it apart until I found what was broken. The chopper unit had broken and parts were sucked into the pump. After going online and finding/ordering all the parts, I cleaned everything and put it back together so as not to lose any
... Read more
thing. When the parts came in,it was an easy job to replace the broken parts and have it back in use. The repair would have cost over $350 and my parts bill was less than $90. Thanks
Read less
Was this instruction helpful to you?
Thank you for voting!