Models
>
MAH2440AGW
MAH2440AGW Maytag Washer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for MAH2440AGW
Viewing 5 of 5Keep searches simple, eg. "belt" or "pump".
$8.04
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for MAH2440AGW
Viewing 2 of 2Leaking
Fixed by these parts
How to fix it
Lid or door won’t close
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Raymond from Fort Myers, FL
- Parts Used:
- WP34001179, WP34001178
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
I leaned on the door while open and it broke off!!
Removed hinge and all screws holding two halves together with glass between them put glass in new parts and replaced all screws hinge fits in there also
installed back on washer and away we went....
installed back on washer and away we went....
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Paul from Green Bay, WI, WI
- Parts Used:
- 34001097
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers
Main sping wore through Spring support bracket
In this model the 2 main springs hang from a bracket built into the top of the machines frame. For some reason one of the pring was installed without the protective plastic grommet (called the guide spring washer). The handened spring eventually wore through the softer metal bracket due to the vibration of the washer.
The purchsed ... Read more plastic part fit into the bracket so firlmy that even with part of the bracket wore away it appears to be still strong wnough to support the weight of the tub. It has made it through 10 loads so far and it still working well.
Getting at the spring was easy but lifting the tub was heavy. Thanks - $4 part saved a $1000 washer.
The purchsed ... Read more plastic part fit into the bracket so firlmy that even with part of the bracket wore away it appears to be still strong wnough to support the weight of the tub. It has made it through 10 loads so far and it still working well.
Getting at the spring was easy but lifting the tub was heavy. Thanks - $4 part saved a $1000 washer.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kurt from Grants Pass, OR
- Parts Used:
- WP34001178
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
A friend had leaned a little on the washer door, and the 10 + year old plastic broke.
Phillips screwdriver is only tool needed. There are about 14 screws around the perimeter, and my hand got tired, so I ended up getting my power driver to finish. Cleaned up all the surfaces while it was apart.
Was this instruction helpful to you?
Thank you for voting!