This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This sturdy metal hinge helps your front-load washer or dryer door open and close smoothly. If your door is sagging or not closing right, replacing the hinge can fix the issue. It’s built to last and ...
This washing machine cleaner includes three time-release tablets designed to remove odor-causing residues, grime, and buildup from high-efficiency and top-load washing machines. The tablets work by cl...
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ashley
September 14, 2023
What does E1 F9 mean
For model number MHW8630HC3
Hello Ashley, Thankyou for writing. The E1 F9 error code occurs when the washer control board detects that the washer cannot drain. We suggest checking the drain hoses and pump for a blockage or build up. We hope this helps!
Was this helpful?
Thank you for voting!
Ashley
September 14, 2023
How to unlock my door
For model number MHW8630HC3
Hi Ashley,
Glad to hear from you. According to your owner's manual, if the door is locked at the end of the wash cycle, there may still be water in the washer. Select the Drain and Spin option to remove the water. Once the water has been removed, the door will unlock. If your washer is on the Fresh Hold/Fresh Spin option, the door will remain locked. To unlock the door cancel the Fresh Hold/Fresh Spin option by touching Power. If the door locks when a cycle has started and the Add Garment light is on, touch Start once and the door will unlock. We hope this helps!
Was this helpful?
Thank you for voting!
Ashley
September 15, 2023
I have to keep draining the water out, is the pump clogged
For model number MHW8630HC3
Hello Ashley, Thank you for writing. If the pump is running but not draining, you will need to remove the pump and hose to check for a blockage. If the Pump is not running or there is no blockage, the pump may need to be replaced. We hope this helps!
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Using the Torx Screwdriver, we removed the door from the unit. Then we removed all of the screws on the inside of the washer door. After that we flipped it over and opened it up exposing the inside. We couldn't separate them entirely because there was a screw under the latch piece that we couldn't figure out how to get to. However with a
... Read morell the screws out on the inside of the door, we did have enough room to open it up and access the place cover that holds the hinges in. Once we accessed that we removed the roller tips from the old unit and placed them on the new one. Then we reversed the process. With a couple screws in we realized we had put the hinge in reversed from what it needed to be, so we reopened it and switched it around. Then completed replacing all the screws and reattached it to the washer. It opens and closes perfectly and we saved a couple hundred dollars for sure, as the quote to come out had been a $150 trip charge.
Replaced the Whirlpool washer water inlet valve. 1. Unplug washer 2. Close Hot and Cold water valves 3. Remove top cover of the machine by taking out 3 screws in the top back. Slide top back and remove. 4. Water Inlet Valve is located on the back left side, remove tubing using a nutdriver to loosen the hose clamps.
... Read more />5. Water Inlet Valve is removed by removing the screw in the back of the valve and turning the valve clockwise a little. Replace with the new one, connect hoses, put cover back on, open valves, plug it in. 6. Ran washer and Fabric Softener dispenser now works
