Models
>
MVWC565FW2
MVWC565FW2 Maytag Washer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for MVWC565FW2
Viewing 5 of 5
Keep searches simple, eg. "belt" or "pump".
$39.63
The washer drive pulley kit is also known as a replacement clutch assembly, or a cam kit. The drive pulley is found at the bottom of your washing machine, mounted to the drive shaft. Common symptoms i...
In Stock
Order now and your part arrives by Apr 9
$27.83
The drive hub connects the basket of your washer to the transmission shaft, which in turn allows the basket to spin. If your washer will not agitate, spins slowly, or is excessively noisy, it may requ...
In Stock
Order now and your part arrives by Apr 9
$7.60
This is a multi-use screw and can be used on a variety of appliances. The measurements of the screw are: 8/18 x 3/8. *Please note: the screw is sold individually. Refer to the manual provided by the m...
In Stock
Order now and your part arrives by Apr 9
$91.72
This suspension rod kit is a quick and easy solution to stop your washer from banging or shaking during cycles. It helps stabilize the drum and reduce vibrations, protecting your machine from internal...
In Stock
Order now and your part arrives by Apr 9
This is a genuine OEM door lock assembly for a top load washing machine. This part is also known as a door switch, and it is used to communicate whether the door to the washer is opened or closed. If ...
In Stock
Order now and your part arrives by Apr 9
$11.98
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
In Stock
Order now and your part arrives by Apr 9
$52.50
This 6-pin shift actuator controls the washer’s transmission, allowing it to switch between agitating and spinning. It’s a common fix for washers that won’t spin, get stuck mid-cycle, or make odd nois...
In Stock
Order now and your part arrives by Apr 9
This insert is sold individually. Knob not included. Knob is sold separately.
In Stock
Order now and your part arrives by Apr 9
$7.60
Sold individually. NOTE: The color on the screw may not be the same as the image, but will still function the same.
In Stock
Order now and your part arrives by Apr 9
This washing machine cleaner includes three time-release tablets designed to remove odor-causing residues, grime, and buildup from high-efficiency and top-load washing machines. The tablets work by cl...
Special Order
In Stock
Order now and your part arrives by Apr 9
$7.60
This gray and white washer lid bumper contains a rubber bottom and is sold individually.
In Stock
Order now and your part arrives by Apr 9
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mike
December 31, 2021
The washing machine sounds like the motor keeps running but none of the lights are on and you have to unplug it to stop the motor from running?
For model number MVWC565FW2
Hello Mike, thank you for the great question. You may want to take a look at your door switch. The door switch can be the cause of the unit not turning on or off. The Switch is part FIX12704713. If that is not the issue then you might need to take a look at your Control Board part FIX12731238 for being the issue. We hope this helps.
7 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Lydia
February 23, 2023
My washer will no longer fill up with the deeep water wash. Its like its always stuck on sensing (and wint thoroughly clean my clothes) any suggestions?
For model number MVWC565FW2
Hello Lydia, thank you for reaching out. You may need to check your lid lock assembly, part number FIX12704713. A faulty lid lock can cause an interruption in the normal cycle of operation. Check if your water inlet valve, part number FIX11773194, is operating normally and if the hose connected to the inlet valve is not clogged. Check if the water pressure hose, part number FIX11741846, is not clogged as this acts as a level pressure switch that tells your appliance if your tub is at the desired water level. We hope this information is useful!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
April
November 3, 2023
Washer on sensor mode won't go to wash cycle. Wash light is on but it doesn't do anything. Any suggestions?
For model number MVWC565FW2
Hi April, thank you for the question. Based on our understanding of the issue, we would recommend checking the shift actuator, part number FIX11769864. You may need to replace it to fix the issue. We hope that helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Darrell
February 28, 2024
When first starting to spin is load and shakes , have replaced suspension rods already.
For model number MVWC565FW2
Hello Darrell, thank you for reaching out to Fix. We have concluded that the issue is with the drive hub kit, part number FIX6012095. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Allen
May 14, 2022
I had the washer lid lock and would not release i ran the dinostic and it said i had a bad lid lock switch i replaced it now the washer will wash but now it stops after the wash cycle and will not go into rinse and the spin cycle could i have got the lid lock switch or do i have a different problem it doesn’t have any new codes on it
For model number MVWC565FW2
Hello Allen, Thank you for your inquiry. You can test the lid lock switch with a multimeter to make sure it is working properly. If it it is not rinsing or spinning, you could also have an issue with the shift actuator, the washer drive pulley, the water pump, the drive motor, the capacitor, and the water inlet valve. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Related Parts:
- < Prev
- 1
- 2
- 3
- Next >
Common Problems and Symptoms for MVWC565FW2
Viewing 18 of 18Shaking and Moving
Fixed by these parts
How to fix it
Will not agitate
Fixed by these parts
How to fix it
Spinning Issues
Fixed by these parts
How to fix it
Leaking
Fixed by these parts
How to fix it
Spins slowly
Fixed by these parts
How to fix it
Noisy and Marks Left on Clothes
Fixed by these parts
How to fix it
Will Not Start
Fixed by these parts
How to fix it
Locking Issues
Fixed by these parts
How to fix it
Cycle Not Advancing
Fixed by these parts
How to fix it
Will not drain
Fixed by these parts
How to fix it
Lid or door won’t close
Fixed by these parts
How to fix it
Burning smell
Fixed by these parts
How to fix it
Water Filling Issues
Fixed by these parts
How to fix it
Draining Issues
Fixed by these parts
How to fix it
Timer Not Working
Fixed by these parts
How to fix it
Does not dispense fabric softener or detergent
Fixed by these parts
How to fix it
No hot or cold water
Fixed by these parts
How to fix it
Marks left on clothes
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Allison from RICHFORD, NY
- Parts Used:
- W10528947
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Hub had warn its grooved teeth off and washer wouldnt agitate
ordered hub and it shipped quickly. I was able to put the hub in place and screw the screws in. you want to tighten them down slowly and go around to each screw tightening a little at a time so you don't break the hub. as you tighten the screws down the hub slides down flush. its impossible to just push the hub on with your hand. Buttoned
... Read more
it back up and got caught up on laundry. good day when the washer is fixed.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from BLOOMINGTON, IN
- Parts Used:
- W10721967
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Socket set
Noise, grinding sounds. Wash tub stopped turning but motor and cycles kept functioning. Process of elimination, must be the clutch assembly.
Easy, just followed the repair video. Recommend also ordering the drive belt. Bought one locally during my repair.
Was this instruction helpful to you?
Thank you for voting!
Wouldn't spin properly
Replaced the gears that were eaten up, the retainer and the actuated. All parts but the spring are plastic. Did all according to your instructions. Happy to report all went well. Washer is working again.
Was this instruction helpful to you?
Thank you for voting!