The washer drive pulley kit is also known as a replacement clutch assembly, or a cam kit. The drive pulley is found at the bottom of your washing machine, mounted to the drive shaft. Common symptoms i...
The drive hub connects the basket of your washer to the transmission shaft, which in turn allows the basket to spin. If your washer will not agitate, spins slowly, or is excessively noisy, it may requ...
This is a multi-use screw and can be used on a variety of appliances. The measurements of the screw are: 8/18 x 3/8. *Please note: the screw is sold individually. Refer to the manual provided by the m...
This is a genuine OEM door lock assembly for a top load washing machine. This part is also known as a door switch, and it is used to communicate whether the door to the washer is opened or closed. If ...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
If your washer is leaking, will not fill with water, or will not stop filling, there may be an issue with your water inlet valve. This part is used to control the flow of hot and cold water into the w...
This 6-pin shift actuator controls the washer’s transmission, allowing it to switch between agitating and spinning. It’s a common fix for washers that won’t spin, get stuck mid-cycle, or make odd nois...
This agitator is for washers.
Agitator rotates back and forth to move the clothes inside the tub to clean the load.
Unplug the washer before installing this part. Wear work gloves to protect your hands.
This washing machine cleaner includes three time-release tablets designed to remove odor-causing residues, grime, and buildup from high-efficiency and top-load washing machines. The tablets work by cl...
This gray and white washer lid bumper contains a rubber bottom and is sold individually.
In Stock
Order now and your part arrives by May 23
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Vick
March 9, 2023
On any cycle lights flash and making a loud noise with buzzers?
For model number MVWC465HW2
Hello Vick, thank you for your question. According to our research, an object has lodged itself inside the drain pump. There can be items such as a small sock, a coin, a toothpick, or something else small in your clothes pockets when you wash them. It can cause a buzzing sound. Please check the drain pump and clean it properly. If this does not help, we would recommend checking the following parts: the suspension, part number FIX12349409, the motor, part number FIX11726282, and the pump, part number FIX11770076. It may be something clogging the pump. Also, the faulty motor will produce a humming noise at the start of the spinning. If the problem persists, you may need to check the control board, part number FIX16744869. We hope this information helps!
When I plug it in all it does is make a wining sound and won't fill up with water or anything
For model number MVWC465HW2
Hello Steven, thank you for getting in touch today. This can indicate a water supply issue. If the water pressure to the appliance is good, you may have a faulty water inlet valve FIX12349267. Thank you for the inquiry, good luck with the repair!
ordered hub and it shipped quickly. I was able to put the hub in place and screw the screws in. you want to tighten them down slowly and go around to each screw tightening a little at a time so you don't break the hub. as you tighten the screws down the hub slides down flush. its impossible to just push the hub on with your hand. Buttoned
... Read more it back up and got caught up on laundry. good day when the washer is fixed.
Replaced the gears that were eaten up, the retainer and the actuated. All parts but the spring are plastic. Did all according to your instructions. Happy to report all went well. Washer is working again.
