Models > WD100CV

WD100CV LG Washer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for WD100CV

Viewing 4 of 4
Keep searches simple, eg. "belt" or "pump".
$9.88
In Stock
In Stock
In Stock
$8.79
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
$11.41
In Stock
In Stock
$34.45
In Stock

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Common Problems and Symptoms for WD100CV

Viewing 2 of 2
Lid or door won’t close
Fixed by these parts
Fixing Fixing
How to fix it
Leaking
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Angelica from HOUSTON, TX
Parts Used:
6322FR2046G
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Wrench (Adjustable)
Top loading washing machine displayed "tE" error
Disconnect machine from power source. Then, disconnect any tubes from the back side (make sure you close any water valves before doing so). Then, lay the machine on its back to access the bottom of the machine. Then, locate the thermistor and replace it with the new one (the thermistor will have two screws holding it in place, simply remo ve the screws and replace the thermistor, then screw it back in). After the new part is installed, stand the machine back up and make sure to connect any tubing to its proper place. Done.
6 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Patricia from GIG HARBOR, WA
Parts Used:
AGM75369502
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
The Hinge on the sidekick washer lid broke.
Using pliers I applied pressure on the center of white plastic hinge pin allowing me to slide the pin hinge out. I removed the lid, replaced it with the new one and inserted a new pin hinge.
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Zach from REYNOLDS, IL
Parts Used:
AGM75369502
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Door Latch Broke causing washer to leak - This was the fix!
Our toddler stood on the handle of the pedestal washer - broke it - but we didn't know how much of a problem this was until the washer started to leak. Well, gravity doesn't work backwards, so I started with assuming the door seal was wrong instead of any drains or hoses. Ordered this part (which was perfect by the way) and fixed it right away.

Special note: you DO NOT need additional hinges as the replacement door comes with them already. To replace the hinges, simply push them out from the back side (i.e. opposite end where they are compressed). Installing new ones is easy, almost too easy to where you think it is not enough, but if they are seated and the door operates it is fine.

Exceptionally easy fix. Was able to do it with two sleeping kids under 3 years old never waking up in less than 5 minutes. 100% satisfied.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!