Models > F10C7FD7

F10C7FD7 LG Washer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
Water Inlet Valve - Hot – Part Number: 5220FR2006H
$26.80
The hot water valve is found at the back of your washer and controls the flow of hot water into the machine. If the valve is defective, the washer may leak, overfill, fill slowly, or not fill with wat...
In Stock
Order within the next 32 mins and your part ships today!
Shock Absorber Kit – Part Number: 383EER3001J
$63.16
This kit includes 1 shock absorber and 2 pins.
In Stock
Order within the next 32 mins and your part ships today!
SENSOR ASSEMBLY – Part Number: 6501KW2002B
$41.72
This is a replacement sensor assembly for your washer. It may also be known as a motor rotor position sensor. The sensor assembly monitors the direction and speed of the spinning rotor and communicate...
In Stock
Order within the next 32 mins and your part ships today!
Washer Hose with Bellows – Part Number: 4738ER1004B
$31.32
This washer hose with bellows, also known as a dispenser hose, is a genuine OEM replacement part for your washer. Replacing this part can be helpful if your washer is leaking. The dispenser hose conne...
In Stock
Order within the next 32 mins and your part ships today!
Locking Pin – Part Number: 4774FR3118B
$14.48
The locking pin is used to hold the shock absorber on the washer. There is a pin used at the bottom and top of the shock absorber. Sold individually.
Special Order
BOLT ASSEMBLY – Part Number: FAA31690703
$16.69
In Stock
Order within the next 32 mins and your part ships today!
Hose – Part Number: 4738ER2002A
$27.20
In Stock
Order within the next 32 mins and your part ships today!
ROTOR ASSEMBLY – Part Number: AHL72914402
$179.13
In Stock
Order within the next 32 mins and your part ships today!
Heater Assembly – Part Number: AEG33121501
$100.06
Special Order
Switch Assembly, Pressure – Part Number: 6601ER1006G
$49.27
On Order
Washer Tub Bearing – Part Number: MAP61913708
$48.20
Tub bearing. This part is very difficult to install. The manufacturer recommends replacing the complete rear tub and bearing assembly.
In Stock
Order within the next 32 mins and your part ships today!

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for F10C7FD7

Viewing 8 of 8
Leaking
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Will not agitate
Fixed by these parts
Fixing
How to fix it
Will Not Start
Fixed by these parts
Fixing
How to fix it
No hot or cold water
Fixed by these parts
Fixing
How to fix it
Shaking and Moving
Fixed by these parts
Fixing
How to fix it
Water Filling Issues
Fixed by these parts
Fixing
How to fix it
Spinning Issues
Fixed by these parts
Fixing
How to fix it
Spins slowly
Fixed by these parts
Fixing
How to fix it
Replacing the Water Inlet Valve - Hot

Replacing the Water Inlet Valve - Hot

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Mark from Harrisburg, PA
Parts Used:
6501KW2002B
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
LE Error Message and won't spin drum properly
I first tested the motor per the service manual. I checked the resistance between the terminals of the 3 pin connector. It's supposed to be 5-15 ohms. The motor checked out so I replaced the main electrical board. It turns out that wasn't the problem. After a brief web search I found out that the hall sensor (which is attached to the motor stator) was the likely cause of the failure. I replaced that and everything works great now. And now I have a spare main board in case that ever fails. I also want to mention that I took the time to remove the dispenser box (where the water comes in and is directed to the different cleaning products) and cleaned it with a very strong bleach solution. It got rid of the mildew and funky smell. It seems that the fabric softener caused a lot of mildew to form inside the dispenser directly above the fabric softener tray. The bleach took care of that. This is probably something that should be done routinely to keep the mildew from forming.
Read less
235 of 307 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
scott from GODDARD, KS
Parts Used:
6501KW2002B
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
LE fail code
Removed back of washer with screw driver, Removed outer motor cover with a 17 mm socket (1 bolt), Removed motor stater using 10 mm socket (8 bolts). Left motor plugged in and and tipped to the side exposing the sensor. Unplug and snap off sensor. Reassembled in opposite order. Machine works great. Very easy fix, and perfect fit on part.
24 of 25 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sanjay from HOLTSVILLE, NY
Parts Used:
5220FR2006H
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
Water was filling continues even the machine was unplugged
I did repaired while looking at video at your site .thanks to your team ..
20 of 24 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More