Models > 41542

41542 LG Washer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
Washing Machine Drain Pump – Part Number: 4681EA2001T
$57.07
This is a drain pump motor assembly for washers. This OEM part is responsible for removing water from the washer during the drain part of the cycle. When this part is clogged, damaged or defective it ...
In Stock
Order now and your part arrives by Mar 19
Water Inlet Valve - Hot – Part Number: 5220FR2006H
$34.97
The hot water valve is found at the back of your washer and controls the flow of hot water into the machine. If the valve is defective, the washer may leak, overfill, fill slowly, or not fill with wat...
In Stock
Order now and your part arrives by Mar 19
Magnetic Door Plunger – Part Number: AGM73610701
$18.85
This magnetic door plunger is a genuine replacement component designed to keep the washing machine door slightly ajar when not in use. By allowing air circulation, it helps the inner door and tub seal...
In Stock
Order now and your part arrives by Mar 19
Door Lock Assembly – Part Number: EBF49827801
$69.31
The door lock assembly is a genuine OEM part for your washing machine. This part informs the washer that the door is closed and locked in place, which allows the machine to start its cycle. If you are...
In Stock
Order now and your part arrives by Mar 19
Tub-to-Pump Drain Hose – Part Number: 4738ER1002A
$54.01
This hose has bellows to allow for flexibility during the wash and spin cycles.
In Stock
Order now and your part arrives by Mar 19
Shock Absorber Kit – Part Number: 383EER3001J
$41.15
This kit includes 1 shock absorber and 2 pins.
In Stock
Order now and your part arrives by Mar 19
SENSOR ASSEMBLY – Part Number: 6501KW2002B
$54.01
The motor rotor position sensor monitors the direction and speed of the spinning rotor and communicates this information to the electronic control board. If your washer is displaying an LE error code ...
In Stock
Order now and your part arrives by Mar 19
Washer Gasket – Part Number: 4036ER4001B
$24.10
This rubber tub seal fits between the front and rear halves of the washing machine’s outer tub to prevent water leaks. It helps maintain proper washing performance and may need replacement if you noti...
In Stock
Order now and your part arrives by Mar 19
Detergent Dispenser – Part Number: 3891ER2003A
$24.10
If your washer isn’t dispensing detergent or fabric softener properly, this replacement container assembly may be the fix you need. Designed to hold liquid cleaning agents and release them at the righ...
In Stock
Order now and your part arrives by Mar 19
Washer Hose with Bellows – Part Number: 4738ER1004B
$41.15
This washer hose with bellows, also known as a dispenser hose, is a genuine OEM replacement part for your washer. Replacing this part can be helpful if your washer is leaking. The dispenser hose conne...
In Stock
Order now and your part arrives by Mar 19
MOTOR ASSEMBLY,AC,PUMP – Part Number: EAU61383518
$103.95
On a washer, this part is used for circulating the water. On a dishwasher, it is used for draining the water.
In Stock
Order now and your part arrives by Mar 19
Inlet Valve Assembly – Part Number: 5220FR2008F
$117.95
The water inlet valve in your washer connects to the water source and solenoid wires, and ensures the tub has the right amount of water entering it. If your washing machine continues to fill after it ...
In Stock
Order now and your part arrives by Mar 19
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for 41542

Viewing 18 of 18
Will not drain
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Leaking
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Lid or door won’t close
Fixed by these parts
Fixing Fixing
How to fix it
Draining Issues
Fixed by these parts
Fixing
How to fix it
Will Not Start
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Water Filling Issues
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Locking Issues
Fixed by these parts
Fixing Fixing
How to fix it
Does not dispense fabric softener or detergent
Fixed by these parts
Fixing Fixing
How to fix it
Will not agitate
Fixed by these parts
Fixing
How to fix it
Spinning Issues
Fixed by these parts
Fixing Fixing
How to fix it
Not draining
Fixed by these parts
Fixing Fixing
How to fix it
Shaking and Moving
Fixed by these parts
Fixing
How to fix it
Engine runs but does not pump water
Fixed by these parts
Fixing
How to fix it
No hot or cold water
Fixed by these parts
Fixing
How to fix it
Noisy
Fixed by these parts
Fixing
How to fix it
Spins slowly
Fixed by these parts
Fixing
How to fix it
Noisy
Fixed by these parts
Fixing
How to fix it
Noisy and Marks Left on Clothes
Fixed by these parts
Fixing
How to fix it
Replacing the Washing Machine Drain Pump

Replacing the Washing Machine Drain Pump

Replacing the Magnetic Door Plunger

Replacing the Magnetic Door Plunger

Replacing the Water Inlet Valve - Hot

Replacing the Water Inlet Valve - Hot

Replacing the Door Lock Assembly

Replacing the Door Lock Assembly

Replacing the Shock Absorber Kit

Replacing the Shock Absorber Kit

Replacing the Washer Hose with Bellows

Replacing the Washer Hose with Bellows

Replacing the Tub-to-Pump Drain Hose

Replacing the Tub-to-Pump Drain Hose

Replacing the MOTOR ASSEMBLY,AC,PUMP

Replacing the MOTOR ASSEMBLY,AC,PUMP

View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Jorge from Apple Valley, CA
Parts Used:
4681EA2001T
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
Washing maching wouldn't drain
Removed the top of the washer by removing the 4 back screws and 2 small brackets. Then I removed the front panel, this was actually the hardest part, 2 screws and 8 tabs that you pop out carefully from the top of the panel. I only disconnected the power button and was able to rest the panel on top of the washer. The rest of the washer cam e apart quickly just moving down the front of the washer and removing the door, latch, tub gasket, drain cover. Removing the pump was just a mater of disconnecting the drain hoses, and one clip under the drain assembly. 3 screws attach the drain to assembly to the pump and only 2 wires that are clearly marked. Reassembly is just going back through in reverse order of disassenbly. The best thing about this is that it all comes apart with a standard phillips screwdriver.
Read less
589 of 757 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Mark from Harrisburg, PA
Parts Used:
6501KW2002B
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
LE Error Message and won't spin drum properly
I first tested the motor per the service manual. I checked the resistance between the terminals of the 3 pin connector. It's supposed to be 5-15 ohms. The motor checked out so I replaced the main electrical board. It turns out that wasn't the problem. After a brief web search I found out that the hall sensor (which is attached to the motor stator) was the likely cause of the failure. I replaced that and everything works great now. And now I have a spare main board in case that ever fails. I also want to mention that I took the time to remove the dispenser box (where the water comes in and is directed to the different cleaning products) and cleaned it with a very strong bleach solution. It got rid of the mildew and funky smell. It seems that the fabric softener caused a lot of mildew to form inside the dispenser directly above the fabric softener tray. The bleach took care of that. This is probably something that should be done routinely to keep the mildew from forming.
Read less
253 of 334 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Omnitech from Warrenville, IL
Parts Used:
AGM73610701
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Door would not close
There is a magnet at the bottom of the door which allows the door to be held ajar when the washer is not in use to allow the tub and gaskets to dry. A tab on the plastic housing which retains the magnet broke which allowed the housing to pull free of the door and stick itself to the machine preventing the door to close. Easy fix to replac e the magnet was $18. Instructions were included in the box. Part number on the drawing was A165. PS3618292 Magnetic Door Plunger
Read less
157 of 178 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More