11022352510 Kenmore Washer - Parts

The washer drive pulley kit is also known as a replacement clutch assembly, or a cam kit. The drive pulley is found at the bottom of your washing machine, mounted to the drive shaft. Common symptoms i...

The drive hub connects the basket of your washer to the transmission shaft, which in turn allows the basket to spin. If your washer will not agitate, spins slowly, or is excessively noisy, it may requ...

The drive belt works with the pulley in your washer in order to spin the tub. If you notice a burning rubber smell, your washer has become excessively noisy, or it will not spin, it could indicate an ...

This is a multi-use screw and can be used on a variety of appliances. The measurements of the screw are: 8/18 x 3/8. *Please note: the screw is sold individually. Refer to the manual provided by the m...

This suspension rod kit is a quick and easy solution to stop your washer from banging or shaking during cycles. It helps stabilize the drum and reduce vibrations, protecting your machine from internal...

If your washer is leaking, will not fill with water, or will not stop filling, there may be an issue with your water inlet valve. This part is used to control the flow of hot and cold water into the w...

This insert is sold individually. Knob not included. Knob is sold separately.

This hose clamp is sold individually.

This shift actuator plays a key role in the operation of your washing machine by controlling the transition between spin and agitate modes. It also relays spin speed information to the control board, ...

If your washer isn’t cleaning clothes like it used to, the agitator might be the issue. This part spins back and forth to help scrub dirt from fabrics, using a central shaft and fins to move clothes a...

Sold individually.