11021082001 Kenmore Washer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Michelle from Richardson, TX
- Parts Used:
- 72017
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Scratches in Surface
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Samuel from Grass Valley, CA
- Parts Used:
- WP8054939
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken seal
Removed old, pressed on new. This is no story but the reason I am writing is to say how impressed I was with the ease of using your Web site to find my part and of your spectacularly fast service.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kathleen from Ocala, FL
- Parts Used:
- WP8054939
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Washer lid seal replacement
Ordered the part, received part in short time and snapped it on in less than a minute. Seals better than original.
Thanks PartSelect. I will be back.
Thanks PartSelect. I will be back.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Tinley Park, IL
- Parts Used:
- WP8054939
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Old seal fell a part and caused bad virbrations
Slid off the old and slid on the new part. Actually my wife did it with no help and was rather pleased with her self on not needing any help except ordering it.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from Brookhaven, PA
- Parts Used:
- WP8054939
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The lid seal cracked and came off causing vibration
Slid the replacement on the lid and it worked like a charm - no more vibration.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Helen from NASHUA, NH
- Parts Used:
- WP89503
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
Leaking water inlet hoses.
Removed the old hoses and screwed on the new hoses.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joyce from Dallas, TX
- Parts Used:
- WP8054939
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Part was cracked and falling apart
Too simple. The old one practicaly fell off and all I had to do was push the new one into place. It locked itself in and was ready to use.
No more rattling or noise when it runs now.
No more rattling or noise when it runs now.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lisa from North Attleboro, MA
- Parts Used:
- WP8054939
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
rubber seal broke aprt
slid the old seal off the lid and the new one popped on so easily
I do so many self- repairs at home now this was not even an issue.
I do so many self- repairs at home now this was not even an issue.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Debra from Mentor, OH
- Parts Used:
- WP8054939
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The splashguard on the lid kept falling off and eventually split.
Old one fell off in my hands. I just snapped the new one in its place. Super easy. Repairman wanted $43 for the part plus the labor of $39. THe part cost me just $20 with shipping. Thanks!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ronald from Glenwood, MD
- Parts Used:
- WP8054939
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Cracked, broken seal
The old seal had become brittle, cracked and fragmented and would no longer fit in the slot. Without it, washing had become a real mess. I took the new seal and snapped it in within a few seconds and was back up and running again. I looked everywhere for this seal, but this site was the only place I could find it. Thanks for having such a wide range of parts. This inexpensive broken part had made my machine unusuable. If it were not for you, I probably would have to resorted to a Sears appliance technician who would have charged $60 for just showing up.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Brenda from MESA, AZ
- Parts Used:
- WP8054939
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Seal would not seal
Seal snapped in
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- VICKIE from MEQUON, WI
- Parts Used:
- WP8054939
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
the rubber lid seal had torn and was falling off of the lid.
I removed the torn part which just pulled off of the lid and snapped in the new piece. No tools were needed. I also wanted to add that it was great doing business with Part Select. The part came well packaged, it came in a timely manner, and it was the correct part ! I will try Part Select for any of my future repair part needs.
Thank you
Thank you
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Terry from MONROE, MI
- Parts Used:
- WP8054939
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The rubber trim on my old but well working wash machine fell apart.
My husband was ready to look for a new machine but since it works so well I decided to look on line for the replacement. Found it. Received it in the mail in three days and I popped it in. Thanks!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Erik from Atkinson, NH
- Parts Used:
- WP8054939
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The washer lid seal was torn and because, I think, I was getting a moldy/musty smell from the washer and in the clothes.
It was simple slide off the old seal and then clip on the new one. I also want to thank the workers at Parts Select, it was very simple and everything went great. I will be using them again and passing the word on.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sandra from Hamilton, NJ
- Parts Used:
- WP8054939
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The original seal on had deteriorated and was coming apart.
Really nothing to it, especially since the original seal was coming apart. I just ripped it the rest of the way apart and removed it, then slid the new one on in its place.
Was this instruction helpful to you?
Thank you for voting!