AW500C2D Kelvinator Washer - Parts

This water inlet valve assembly is designed for use in washing machines and regulates the flow of both hot and cold water into the appliance during wash cycles. It ensures the correct amount of water ...

This is a screw and it is used with a variety of home appliances. It is less than 1/2 an inch long, and is #8-18 x 3/8. This part is a pan head, sheet metal, screw. It is made of metal.

Holds plated on Trunion .312-18 x 1.625.

This spacer goes between the timer knob and the dial.

This seal goes on top of the transmission below the agitator drive block.

Locking Plate.

This part aids in the spinning or agitating cycles.