WCXH208H2WW General Electric Washer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Roger from Hudson, WI
- Parts Used:
- WH23X10016
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
The water pump becomes very noisy
This is the second time in the same 7 year old appliance. Remove the front bottom cover by removing 2 screws. Then remove the 2 screws holding the pump down. Then unclip the electrical wire from the pump and remove both hoses from the pump by squeezing the spring clamps with a pliers. Have a pan to collect the water that will drain from the lines. Take the new pump and install it in reverse order from above.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jennifer from South Chatham, MA
- Parts Used:
- WH10X10004
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Door catch broken
I paid a plumber $150 to replace this part a year ago. I simply took the screws out,ordered the part,paid for 1 day shipping, and screwed the new part on. The washer DID NOT WORK without this part,and worked perfectly the minute I replaced it.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Carlson from Chicago, IL
- Parts Used:
- WH23X10016
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Washer would not pump out the water and odd noise
removed front lower panel to access pump assy,removed the pump hold down scews and then moved the two hose clamps back then took out assy,just reverse the process to install,always disconnect power and turn off water supply to unit before any service is done
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- giuseppe from sarasota, FL
- Parts Used:
- WH23X10016
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Wrench (Adjustable)
Did not drain or spin
Removed old pump and re installed a new one,took no more than 20 minutes,the hardest part was re connecting the trap- hose and the drai n,very easy .Just unscrew the two screws holding the pump and replace it with the new
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Tammy from Somersworth, NH
- Parts Used:
- WH10X10004
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Broken door latch on front loader machine
The part was exactly what we needed and came sooner than we expected. It was easy to fix and we avoided hiring a repair man.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kathleen from Washington Courthouse, OH
- Parts Used:
- WH10X10004
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
One part of the catch broke off from the main unit.
This repair was incredibly easy - I simply unscrewed the broken catch and installed the new one in its place, using the same screws. The entire process took about five minutes; the hardest part was finding a Phillips screwdriver in my house! Also, I commend Part Select for the prompt, courteous service. When I called, I was connected to an actual person - not a machine - who was very helpful, and the part arrived within 36 hours after the order, without any express mailing services.
Was this instruction helpful to you?
Thank you for voting!