Models
>
WBB24751AU
WBB24751AU ((09)) Bosch Washer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
In Stock
In Stock
$83.15
This door boot is for washers. Door boot forms a seal between the wash tub and the door, preventing leaks.
In Stock
$61.53
Shock absorbers keep the washer from vigorous shaking during it's cycles. They are sold individually.
In Stock
In Stock
In Stock
This drive belt is for washers. Drive belt connects the drive motor to the drive system in the washer to spin the basket.
No Longer Available
In Stock
In Stock
In Stock
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for WBB24751AU
Viewing 2 of 2Lid or door won’t close
Fixed by these parts
How to fix it
Leaking
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- James from ALEXANDRIA, VA
- Parts Used:
- 00651004
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Hinge bracket snapped off
Removed washing machine door. Then removed old hinge. Replaced with the new hinge. Replaced door. SPECIAL NOTE: Do not lose white plastic rings that cover hinge nipples on washer. The replacement part does not come with these 4 pieces.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from ENTERPRISE, AL
- Parts Used:
- 00422174
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
The sleeves on this model washer are two different sizes see below
The thickness of the sleeves are 3.0 mm thick on the base of the sleeve. However the sleeve on the bottom of both the upper and lower hinges of this model washer are different sizes. The base of the sleeve on the top of each hinge post is 3.0 mm but the sleeve on the bottom post of each hinge is only 1.2 mm thick. The bracket on the d
... Read more
oor that holds all 4 screws to attach the door to the washer will not fit unless you reuse the old sleeve from the lower posts or reduce the thickness of the disc on the lower post to 1.2 mm. I spent hours trying to get the door back on and finally saw why I couldn't get the screws back in because the bracket could not go in place and sit flush the the washer.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from WESTFORD, MA
- Parts Used:
- 00651004
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
door hinge broken .. replaced .. but Partselect.com part came bent and with wrong screws
the repair was easy...after i fixed the bent part I got from Partselect and found the old screws, since the new ones provided were the incorrect part
Partselect over-charged, as this same item is 50% less elsewhere
I will take my future business elsewhere, since after reaching out to Partselect.com, they did not repl ... Read more y.
-Mike
Partselect over-charged, as this same item is 50% less elsewhere
I will take my future business elsewhere, since after reaching out to Partselect.com, they did not repl ... Read more y.
-Mike
Read less
Was this instruction helpful to you?
Thank you for voting!