Models > WKHC152HWA

WKHC152HWA (ABWEEUS) LG Washer Dryer Combo

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for WKHC152HWA

Viewing 8 of 8
Keep searches simple, eg. "belt" or "pump".
A rubber barrier around the rotating drum shaft helps protect the washer?s tub bearings from water and detergent. This rear tub shaft seal sits in the rear outer tub, keeping wash water out of the bea...
In Stock
Order now and your part arrives by Nov 21
In Stock
Order now and your part arrives by Nov 21
Smooth, quiet drum movement relies on this washer tub ball bearing. Mounted at the back of the outer tub, it supports the inner drum shaft and reduces friction during wash and spin cycles. This OEM pa...
In Stock
Order now and your part arrives by Nov 21
In Stock
Order now and your part arrives by Nov 21
Drain residual water before cleaning the pump filter with this washer cleanout hose. The flexible rubber hose attaches to the drain pump filter housing, giving remaining water a controlled outlet from...
In Stock
Order now and your part arrives by Nov 21
Seal the washer?s small manual drain hose next to the pump filter with this cap. It prevents leakage during wash cycles and removes so residual water can be drained into a container before the main fi...
In Stock
Order now and your part arrives by Nov 21
This heater assembly is a vital component for LG washing machines, designed to heat water to the correct temperature for optimal cleaning performance. It features an integrated thermistor (sensor prob...
In Stock
Order now and your part arrives by Nov 21
In Stock
Order now and your part arrives by Nov 21
This genuine drain pump assembly removes water from the washer drum and helps prevent leaks and drainage issues. It’s a durable, quiet-running replacement for faulty pumps and fits select models. Repl...
In Stock
Order now and your part arrives by Nov 21
No Longer Available
This pressure switch monitors internal pressure levels to ensure the appliance operates under safe conditions. Accurate sensing supports proper function and cycle progression. Replacing a faulty press...
In Stock
Order now and your part arrives by Nov 21
This drain pump assembly removes wastewater during appliance operation, supporting proper drainage and preventing standing water. Designed for reliable performance, it helps maintain efficient operati...
In Stock
Order now and your part arrives by Nov 21

Common Problems and Symptoms for WKHC152HWA

Viewing 8 of 8
Leaking
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Lid or door won’t close
Fixed by these parts
Fixing
How to fix it
Locking Issues
Fixed by these parts
Fixing
How to fix it
Noisy and Marks Left on Clothes
Fixed by these parts
Fixing Fixing
How to fix it
Spinning Issues
Fixed by these parts
Fixing Fixing Fixing
How to fix it
Will not drain
Fixed by these parts
Fixing Fixing
How to fix it
Burning smell
Fixed by these parts
Fixing
How to fix it
Water Filling Issues
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Tema from STATE ROAD, NC
Parts Used:
ACV72909506
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
Washer drum extreme vibration when spinning
We replaced the three dampers, two in the front and one in the back. We referred to the YouTube video someone posted on this page.
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
willard from RIVERSIDE, CA
Parts Used:
4280EN4001C
Difficulty Level:
Really Easy
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set
Drum was making a very load grinding sound
I took the washer completely apart and ordered any parts that looked worn and put it back together. It’s working like new and will last for a few years
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Tresa from McHenry, IL
Parts Used:
5214FR4006G
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Very visible tear in hose. It was 1 1/2" long
Simply took hose off from inside machine and replaced it with new one. The tore one had a stopper on one end that wrapped to front machine; inside filter compartment. So I put stopper on the other end of new hose and wrapped it to it's holding spot in filter compartment.
Was this instruction helpful to you?
Thank you for voting!