Models > WSM2700TDWAB

WSM2700TDWAB General Electric Washer Dryer Combo

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for WSM2700TDWAB

Viewing 6 of 6
CONTROL PANEL Diagram and Parts List for General Electric Washer Dryer Combo
CONTROL PANEL
DRYER - CABINET, DRUM & HEATER Diagram and Parts List for General Electric Washer Dryer Combo
DRYER - CABINET, DRUM & HEATER
DRYER - MOTOR, BLOWER & BELT Diagram and Parts List for General Electric Washer Dryer Combo
DRYER - MOTOR, BLOWER & BELT
TRANSMISSION ASSEMBLY Diagram and Parts List for General Electric Washer Dryer Combo
TRANSMISSION ASSEMBLY
WASHER - TUBS, HOSES & MOTOR Diagram and Parts List for General Electric Washer Dryer Combo
WASHER - TUBS, HOSES & MOTOR
WASHER CABINET Diagram and Parts List for General Electric Washer Dryer Combo
WASHER CABINET
Keep searches simple, eg. "belt" or "pump".
Dishwasher Hose Clamp Kit – Part Number: WH1X2036
$25.10
This hose clamp kit contains two clamps. The smaller of the two is an inch in diameter while the larger of the two is two inches in diameter.
In Stock
Order now and your part arrives by May 29
DRYER BEARING BRACKET – Part Number: WE13X28680
This bracket is used on the drum bearing.
No Longer Available
V-Belt – Part Number: WH07X10009
$90.54
In Stock
Order now and your part arrives by May 29
High Limit Safety Thermostat – Part Number: WE4X757
$68.99
This hi-limit thermostat acts as a safety mechanism that keeps the dryer from overheating. With this thermostat, a dryer's heating element will cut out if the internal temperature reaches 260 degrees...
In Stock
Order now and your part arrives by May 29
Agitator Drive Hub – Part Number: WH40X175
No Longer Available
Dryer Screw 818 X .31 – Part Number: WR2X9494
This screw is sold individually. Size 8 - 18 x 0.31
No Longer Available
Water Inlet Valve – Part Number: WH13X78
This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.
No Longer Available
IDLER & PULLEY – Part Number: WE03X29378
$86.38
A dryer's idler pulley wheel serves to help the belt to rotate the drum. This arm is what attaches to the idler pulley wheel.
In Stock
Order now and your part arrives by May 29
CLAMP – Part Number: WH01X10048
No Longer Available
SCREW 8-18AB X0.44 QUAD – Part Number: WE02X10071
No Longer Available
Tub Seal Kit – Part Number: WH08X10004
No Longer Available
Washer Timer – Part Number: WH12X1040
The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.
No Longer Available
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for WSM2700TDWAB

Viewing 3 of 3
Leaking
Fixed by these parts
Fixing
How to fix it
Noisy
Fixed by these parts
Fixing
How to fix it
Will not agitate
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Albert from Roselle, IL
Parts Used:
WH45X10018, WH08X10004
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set, Wrench (Adjustable), Wrench set
left a drywall screw in my pockit and it cut the tub
I first made a repaire order online and put on the service order that i needed a new tub.
Someone was to call me the the night before but i never got the call the service man was
coming between 8am and 12 he called at 11
and wanted to come and look at the washer to see what parts he needed i told him i put in the service re qwest that it needed a tub and that if he didn't have the tub not to come because i was not going to pay for a service call if he didn't have the parts he did tell me it would cost me $430.00 so i repaired it myshelf
Read less
8 of 33 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Bob from Riviera Beach, FL
Parts Used:
WH07X10009
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Spin cycle not spining sufficient water from clothes
Remove front of unit. Replace belt that drives the washer. This repair is very easy.
Was this instruction helpful to you?
Thank you for voting!
View More