Models > GLEH1642DS1

GLEH1642DS1 Frigidaire Washer Dryer Combo

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for GLEH1642DS1

Viewing 8 of 8
CONTROL PANEL
COVER
LOWER CABINET / TOP
MOTOR / BLOWER / BELT
MOTOR / TUB
UPPER CABINET / DRUM HEATER
WIRING DIAGRAM
WIRING DIAGRAM

Manuals & Guides for GLEH1642DS1

Click to download
Install
Installation Instructions
(1.55MB)
Install
Installation Instructions
(1.12MB)
Manual
Owner's Manuals
(0.55MB)
Manual
Owner's Manuals
(0.56MB)
Care
Use and Care Manual
(0.3MB)
Wiring
Wiring Diagram
(0.46MB)
Keep searches simple, eg. "belt" or "pump".
Door Strike – Part Number: 131763310
$13.62
Located on the door of front load washing machines, the Door Strike ensures that the door will lock by activating the switch, which in turn allows the appliance to run properly. If your washer door wi...
On Order
Front Load Washer Door Lock and Switch Assembly – Part Number: 131763256
$116.26
This door lock and switch assembly is an authentic OEM replacement part for your front load washing machine. The lock is used to prevent the door from opening while the machine is running, and the swi...
In Stock
Drum Support Bearing – Part Number: 131825900
$8.96
The drum support bearing is an authentic OEM replacement part for your dryer. The bearing is used to support the drum and allow it to rotate smoothly and quietly. If your dryer is excessively noisy wh...
In Stock
Shock Absorber Kit – Part Number: 5304485917
$57.71
This kit is used for front load washers and includes 2 dual-stage shock absorbers, 1 spare shock mounting pin and 4 locking nuts. These shock absorbers keep the washer from vigorous shaking during it's cycles.
In Stock
Drum Glide - White – Part Number: 137513300
$41.84
Appliance requires 2 .Sold individually.
In Stock
Multi-Rib Drum Belt – Part Number: 137292700
$17.06
This belt helps rotate from the drive motor to the drum.
In Stock
Dryer Lint Screen – Part Number: 5304516871
$43.42
This dryer lint screen is for laundry centers. Dryer lint screen captures lint and debris from the exhaust air flowing from the dryer. Follow the instructions in the owner's manual when installing this part.
In Stock
Thermal Limiter - Limit 220 – Part Number: 134120900
$28.16
This thermal fuse limiter is used in dryers to monitor the temperature and make sure it does not overheat. The thermal fuse has a limit of 220 degrees Fahrenheit before the heating element and power a...
In Stock
Door Catch – Part Number: 131658800
$60.53
This door catch is an authentic OEM replacement part for your dryer. This part holds the door strike and ensures that the door stays closed while your dryer is running. This prevents hot air or laundr...
In Stock
Lower Front Felt Seal with Adhesive – Part Number: 5303937183
$33.45
In Stock
Drain Pump - 60Hz 120V – Part Number: 137108000
$161.89
This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time.
In Stock
Timer Knob – Part Number: 131873304
$63.38
This knob accepts a D-shaped shaft.
In Stock
Back to Top View More
Questions and Answers

Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top

Common Problems and Symptoms for GLEH1642DS1

Viewing 26 of 26
Noisy
Fixed by these parts
How to fix it
Lid or door won’t close
Fixed by these parts
How to fix it
Will Not Start
Fixed by these parts
How to fix it
Shakes and moves
Fixed by these parts
How to fix it
No heat or not enough heat
Fixed by these parts
How to fix it
Leaking
Fixed by these parts
How to fix it
Pumps but will not spin
Fixed by these parts
How to fix it
Will not tumble
Fixed by these parts
How to fix it
Door won’t close
Fixed by these parts
How to fix it
Will not drain
Fixed by these parts
How to fix it
Marks left on clothes
Fixed by these parts
How to fix it
Lid or door will not open
Fixed by these parts
How to fix it
Too hot
Fixed by these parts
How to fix it
Takes too long to dry
Fixed by these parts
How to fix it
Will not stop filling with water
Fixed by these parts
How to fix it
Timer will not advance
Fixed by these parts
How to fix it
Will not fill with water
Fixed by these parts
How to fix it
Spins slowly
Fixed by these parts
How to fix it
Will not agitate
Fixed by these parts
How to fix it
Shuts off too soon
Fixed by these parts
How to fix it
No hot or cold water
Fixed by these parts
How to fix it
Door latch failure
Fixed by these parts
How to fix it
Will not shut off
Fixed by these parts
How to fix it
Burning smell
Fixed by these parts
How to fix it
Not draining
Fixed by these parts
How to fix it
Touchpad does not respond
Fixed by these parts
How to fix it
Back to Top
Replacing the Door Strike play video

Replacing the Door Strike

Replacing the Front Load Washer Door Lock and Switch Assembly play video

Replacing the Front Load Washer Door Lock and Switch Assembly

Replacing the Drum Support Bearing play video

Replacing the Drum Support Bearing

Replacing the Shock Absorber Kit play video

Replacing the Shock Absorber Kit

Replacing the Thermal Limiter - Limit 220 play video

Replacing the Thermal Limiter - Limit 220

Replacing the Door Catch play video

Replacing the Door Catch

Replacing the Lower Front Felt Seal with Adhesive play video

Replacing the Lower Front Felt Seal with Adhesive

Replacing the Door Strike play video

Replacing the Door Strike

Back to Top View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
  • Customer:
    Joy from Columbia, MO
  • Parts Used:
    131763310
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Broken Door Catch
This was one of the simpliest repairs I have ever done taking less than 5 minutes to complete. On the inner door I removed the two screws that hold the plastic catch in place. I then removed the broken catch and put the new catch in place. Finally I replaced the two screws that hold the catch in place and it was done.
561 of 577 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    DOUG from KING FERRY, NY
  • Parts Used:
    131763256
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Door on washer wouldn't lock or start
1. Unplug unit.
2. Unscrew 2 nuts holding top in place in rear of unit using phillips head screwdriver.
3.Slide top back and remove.
4. Open door of washer and unscrew 2 screws holding in door lock unit.
5.Pull out unit from the top and install new unit reconnecting the 3 wire connections.
464 of 544 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Stephen from Newnan, GA
  • Parts Used:
    134120900
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
Thermal Limiter opened
Unplugged Dryer.
Opened top of Dryer, over the drum.
Removed Thermal Limiter.
Tested the Thermal Limiter - found it was open.
Checked all vents and exhaust tube for lint build-up.
Replaced Thermal Limiter.
Closed top of dryer.
Plugged Dryer back.
Tested Dryer - it works.
238 of 311 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Back to Top View More