Models > EW30WD55QS1

EW30WD55QS1 Frigidaire Warming Drawer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for EW30WD55QS1

Viewing 3 of 3
Keep searches simple, eg. "belt" or "pump".
$62.67
Sold individually.
In Stock
$6.01
In Stock
$5.79
In Stock
$48.85
In Stock
$12.00
Special Order
No Longer Available
Special Order
$208.65
Special Order
$205.65
Special Order
$115.33
In Stock
No Longer Available
$287.52
Special Order

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for EW30WD55QS1

Viewing 4 of 4
Oven is too hot
Fixed by these parts
Fixing
How to fix it
Little to no heat when baking
Fixed by these parts
Fixing
How to fix it
Oven not heating evenly
Fixed by these parts
Fixing
How to fix it
Element will not heat
Fixed by these parts
Fixing
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
  • Customer:
    Alexander from DELMAR, NY
  • Parts Used:
    5304525427
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
Both oven bake and broil elements lost power suddenly at the same time.
Installation of the temparature sensor, one of the technician recommended parts took no time, just two screws and a snap off/snap on part. It did not fix the problem. I then replaced the main control panel, which requires more work, but didn't solce the ussue either. I then replaced the thermal fuse, which wasn't mentioned by tech support, and required much more disassebly of the top panels of the stove, with still no fix to the problem. I am waiting to replace the thermostat heat sensor unit, the only other part in the circuit controlling power supply, requiring removal of the stove top again,
7 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Ronald from NEVADA, MO
  • Parts Used:
    5304525427
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Top oven overheating
Have a double wall oven and the top oven would not shut off or broiler part would stay on and burn tops of food. Since bottom oven was not having any issues felt like it could
Not be control panel so decided to try the temp sensor. Since replacing oven has worked properly.
5 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Mary from EDGAR, WI
  • Parts Used:
    5304525427
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
sensor should pull into oven enough to easily unsnap and snap but didn't pull out
on the back side of the wall oven the sensor wire was ziptied tight. we had to totally pull oven out of its wall space, remove back panel, unhook zip tie, feed through sensor hole around insulation, connect and then replace back and return and relevel the oven. I have
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!