Models
>
WOS11EM4EB02
WOS11EM4EB02 Whirlpool Wall Oven
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for WOS11EM4EB02
Viewing 6 of 6Keep searches simple, eg. "belt" or "pump".
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Howard from Boynton Beach, FL
- Parts Used:
- 350930
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver
Both outside door handles turned very beige
Everything worked perfectly---thanks to the suggestion of your call center agent. She suggested that since the replacement door handles were no longer available, I should consider repainting them--it worked like a charm. Please tell her she was a life saver. We rent that house in Fl and my returning tenants had complained about the discol
... Read more
oring refer handles. Thank you
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from OAK GROVE, LA
- Parts Used:
- W11025102
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
completely dead
pulled out of wall. removed cover and visually checked for damage. saw none.
saw what looked like a diode next to the control board. ohm meter showed open in both directions.
from diagrams, determined the part to be a thermal fuse. replaced it, powered up. lights came on, set time, and turned the oven on.
it started heated ... Read more all seemed to work normally. noticed the fan was varing speed.
pulled and oiled fan motor. appears to have smoothed out.
i suspect the fan wasnt moving enough air to keep the electronics area cool.
ran for 30 minutes at 350 deg. appears to be ok. time will tell if there is another problem i havent found.
saw what looked like a diode next to the control board. ohm meter showed open in both directions.
from diagrams, determined the part to be a thermal fuse. replaced it, powered up. lights came on, set time, and turned the oven on.
it started heated ... Read more all seemed to work normally. noticed the fan was varing speed.
pulled and oiled fan motor. appears to have smoothed out.
i suspect the fan wasnt moving enough air to keep the electronics area cool.
ran for 30 minutes at 350 deg. appears to be ok. time will tell if there is another problem i havent found.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Peter from PLEASANT PR, WI
- Parts Used:
- W11178521
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Countertop Dishwasher - Non Whirlpool
Since I have All Whirlpool appliances in the home, the only one not a Whirlpool was a counter top dishwasher that looks exactly like it could be a Whirlpool and so not to be the odd unit out, I labeled it with with a Whirlpool logo nameplate on the face of the door. Now everything matches perfectly and all in the same exact color white t
... Read more
oo.
Just measured and marked where the plate was to be located, cleaned that part of the surface, peeled the backing and carefully placed the logo name plate in place and pressed it on. Voila. Done and looks original as well. Call me the big, deep fakearooski.
Just measured and marked where the plate was to be located, cleaned that part of the surface, peeled the backing and carefully placed the logo name plate in place and pressed it on. Voila. Done and looks original as well. Call me the big, deep fakearooski.
Read less
Was this instruction helpful to you?
Thank you for voting!