Models > 2961010

2961010 Roper Wall Oven

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for 2961010

Viewing 7 of 7
CONTROL PANEL Diagram and Parts List for Roper Wall Oven
CONTROL PANEL
DOOR CATCH Diagram and Parts List for Roper Wall Oven
DOOR CATCH
MAGNETRON Diagram and Parts List for Roper Wall Oven
MAGNETRON
MEAT PROBE AND JACK, LIT/OPTIONAL Diagram and Parts List for Roper Wall Oven
MEAT PROBE AND JACK, LIT/OPTIONAL
OVEN Diagram and Parts List for Roper Wall Oven
OVEN
OVEN DOOR Diagram and Parts List for Roper Wall Oven
OVEN DOOR
WIRING DIAGRAM Diagram and Parts List for Roper Wall Oven
WIRING DIAGRAM
Keep searches simple, eg. "belt" or "pump".
Screw – Part Number: WP681249
$5.42
Sold individually.
In Stock
SWTCH-LITE – Part Number: WP8189867
No Longer Available
INSERT – Part Number: 304546
No Longer Available
SWITCH – Part Number: 285726
No Longer Available
DISCONTINUED – Part Number: 4332009
No Longer Available
Barrier, Visibility – Part Number: 310330
No Longer Available
Screw 10-32x17/22` – Part Number: 295849
No Longer Available
Speed Nut 10 - 32 – Part Number: 108069
No Longer Available
Screw 10-32x1/2`` – Part Number: 295850
No Longer Available
Screw 10-32x1/2`` – Part Number: 102428
No Longer Available
Hex Nut 10-24 – Part Number: 74056
No Longer Available
Lo Voltagexxx 2961000 – Part Number: 316453
No Longer Available
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
James from Fort Collins, CO
Parts Used:
WP8189867
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Wrench set
light wont come on
Well, when you put the back cover on and screw it down make sure you have nothing touching the white wire leading to the oven light. I did and it blew the push switch when I threw the 220 breaker. Actually, the light was on when I came in the room, but when I pushed the switch on the front panel it sparked in the rear and popped the break er. Then I saw the short and when I tested the switch it would not click. The install was fine.
Read less
4 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More