Models
>
LRE3085ST
LRE3085ST (ASTLLGA) LG Wall Oven
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
In Stock
$81.64
If your appliance isn’t heating or cooling the way it should, this temperature sensor might be the issue. Also known as a thermistor, it helps your appliance stay at the right temperature by working w...
In Stock
In Stock
In Stock
In Stock
In Stock
Special Order
Special Order
In Stock
Special Order
Special Order
On Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for LRE3085ST
Viewing 7 of 7Little to no heat when baking
Fixed by these parts
How to fix it
Element will not heat
Fixed by these parts
How to fix it
Oven not heating evenly
Fixed by these parts
How to fix it
Oven is too hot
Fixed by these parts
How to fix it
Won’t turn on
Fixed by these parts
How to fix it
Door won’t open after self cleaning cycle
Fixed by these parts
How to fix it
Will Not Start
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Richard from CHESAPEAKE, VA
- Parts Used:
- MEE62385201
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Hammer 1, Glass range top and heating element 0
Dropped a hammer on the range while removing a ceiling light. Viewed a How-To video on Google. Ordered the needed parts. Followed the steps from the How-To video. Reinstall was a bit tricky by myself - could have used an extra set of hands. I have a few words of caution:
1) Put something between the range top and range - like a ... Read more sheet or drop cloth - to prevent a dropped screw from falling into a crevice in the stove. I dropped a screw and was unable to retrieve it, even with a magnet.
2) Makes sure you remove all bumpers, screws, clips, etc. from the item being replaced and put them on the new item if the new item does not come with replacement bumpers, screws, etc.
1) Put something between the range top and range - like a ... Read more sheet or drop cloth - to prevent a dropped screw from falling into a crevice in the stove. I dropped a screw and was unable to retrieve it, even with a magnet.
2) Makes sure you remove all bumpers, screws, clips, etc. from the item being replaced and put them on the new item if the new item does not come with replacement bumpers, screws, etc.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from SOUTH HAVEN, MI
- Parts Used:
- EBR74164801
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
Convection bake fan would not shut off
Looked at schematic to follow circuitry. Checked online for advice. Most online advice suggested replacing thermostat. Thermostat is not in controlling fan circuit!
PCB is only circuit controlling fan on and off. I unplugged fan so as to use rest of range until I received and installed PCB. Works fine now. Note: I have electronics ... Read more background and can read most circuitry.
PCB is only circuit controlling fan on and off. I unplugged fan so as to use rest of range until I received and installed PCB. Works fine now. Note: I have electronics ... Read more background and can read most circuitry.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Edward from FORT WORTH, TX
- Parts Used:
- EBR64624906
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers, Socket set
Half the LEDs on my stove went out, the part fixed it.
Unplugged the stove, took the top cover off, removed the old part and replaced it.
Was this instruction helpful to you?
Thank you for voting!