Models > RGJ534GEP1

RGJ534GEP1 Hotpoint Wall Oven

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for RGJ534GEP1

Viewing 4 of 4
Section Diagram and Parts List for Hotpoint Wall Oven
Section
Section Diagram and Parts List for Hotpoint Wall Oven
Section
Section Diagram and Parts List for Hotpoint Wall Oven
Section
Section Diagram and Parts List for Hotpoint Wall Oven
Section
Keep searches simple, eg. "belt" or "pump".
Oven Door Seal – Part Number: WB32K5050
This door seal goes around the oven body to help seal in the heat of the oven.
No Longer Available
Electronic Clock Control Kit – Part Number: WB27T10327
This kit is equipped with the oven control, faceplate and any necessary installation wires. This part may look different from the original, but should still function the same. The wiring is different,...
No Longer Available
CONTROL VALVE – Part Number: WB21K5009
$203.54
Special Order
Broil Burner Baffle – Part Number: WB34X38846
$58.09
In Stock
Order now and your part arrives by Mar 19
Rocker Switch – Part Number: WB24K5035
$22.00
Special Order
HINGE OV Door RT – Part Number: WB14K5006
No Longer Available
HINGE OV Door LT – Part Number: WB14K5007
$96.95
Special Order
DOOR INSULATION – Part Number: WB35K5054
$37.03
In Stock
Order now and your part arrives by Mar 19
Control Panel End Cap - Black - Right Side – Part Number: WB36K5129
$51.97
Special Order
OVERLAY PNL Lower (BK) – Part Number: WB56K10048
$76.95
On Order
Oven Bottom Panel – Part Number: WB63K5097
$298.77
Special Order
Control Panel End Cap - Black - Left Side – Part Number: WB36K5128
No Longer Available
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
eric from washington, DC
Parts Used:
WB32K5050
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
oven door seal was old and falling apart
at first thought the seal would just slide out and the same for the replacement. when I realized that this was not the case and began to wonder what....? I saw the screws at top and bottom, took them off and voila the inner shell moved forward enough to take out the old, slide in the new, push in, replace the screws and back to a happy w ife with an oven that can bake correctly again
Read less
56 of 67 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
chris from FORT BRAGG, CA
Parts Used:
WB21K5009
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
gas valve quit working
Very easy, didn't even have to take the oven out of the wall. Will use this site again.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
jim from SAVAGE, MN
Parts Used:
WB32K5050
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
the oven seal was dried out and crumbling not safe to use on a gas appliance
From what I was able to find info on I was to take out 5 screws 3 on top and 2 on the bottom then the inner oven box is suppose to pull out a bit to take the old gasket off and put the new onw on the box was so rusty it would not pull out so I was able to get enough of the box out using a large screwdriver the lip of the gasket tucks behi nd the box. I ended up using a small screwdriver to work the new gasket behind the oven box. The door now needs new springs the tension on them is not strong enough to pull the door shut the way it should there's still room to push the door into new gasket.
Read less
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
View More