Models
>
CT9050EK5DS
CT9050EK5DS General Electric Wall Oven
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for CT9050EK5DS
Viewing 5 of 5
Keep searches simple, eg. "belt" or "pump".
$56.73
This probe is used to check the internal temperature of the meat to ensure proper temperature is reached. Also known as a Meat Probe.
In Stock
In Stock
In Stock
In Stock
$12.20
This part is a replacement screw for your oven. It is made of black metal and is sold individually. This screw is approximately 1/4 inch in diameter and about 1/2 inch in length. It is designed to con...
In Stock
$230.56
The Door window assembly is the heat resistant glass and frame in the centre of the oven door.
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
$8.06
This part is the replacement rack guide nut for your range. It is made of metal and is sold individually. The rack guide nut helps secure the rack guide screw. The main reason you would need to replac...
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for CT9050EK5DS
Viewing 2 of 2Will Not Start
Fixed by these parts
How to fix it
Oven is too hot
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Thomas from Goshen, IN
- Parts Used:
- WB26X31060
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Socket set
Blower Fan quit working
It took a while to remove approx 30 screws to get to the blower. So my oven was sitting, torn apart while I waited on the new blower fan that I had ordered. It arrived shortly, about 5 days. When I opened the box I saw that PARTSELECT had sent me a drain pump instead of the blower fan that I had ordered. Since an oven does not require a d
... Read more
rain pump and it wouldn't work to replace my broken blower fan I had to return it. I was told that I needed to send the part back in order to get a refund. After I sent their drain pump back at a cost of $13 they emailed me and said I didn't need to send the drain pump back. And they refunded me minus shipping So I had to pay shipping both ways for a part that was wrong. And I ordered it from someone else. I put the new blower fan that I had bought from another company in and replaced the 30 screws. And the oven has been working fine ever since. Thank you PARTSELECT for allowing me to tell people how you operate. They have a money back guarantee, but they don't give you back ALL your money. Thanks Again.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Salih A. Hindas / DHA from SPRNGFLD GDNS, NY
- Parts Used:
- WB26X31060
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers
Clear Error Code F96
Changed Fan Blower only, which cleared the Error Code F96.
Other parts have been kept as spares.
Other parts have been kept as spares.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Darrell from ACWORTH, GA
- Parts Used:
- WB26X31060
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers
Fan blower error on oven, oven would not work or
Turn power off to oven, removed screws holding oven into cabinet, get assistance to remove oven, I used 2 dinner table chairs to set the oven on, be careful as the front of the oven is heavier than the back. Removed the back sheet metal covers, about 20 screws or so. Removed Fan motor, replaced with new fan motor, and reversed installed.
... Read more
Oven works great.
Read less
Was this instruction helpful to you?
Thank you for voting!