Models
>
MORD230B
MORD230B Dacor Wall Oven
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Manuals & Guides for MORD230B
Click to downloadKeep searches simple, eg. "belt" or "pump".
$38.79
This 12-volt, 20-watt halogen bulb uses a G4 bi-pin base to restore interior or task lighting in compatible cooking appliances. Its clear light makes the cooking area easier to see during use. Replace...
Special Order
$42.85
This temperature sensor checks the heat inside the oven and sends the reading to the control board, the board uses this reading to keep the set temperature, replace the sensor if the oven heats too sl...
In Stock
Order now and your part arrives by Sep 26
In Stock
Order now and your part arrives by Sep 26
An oven that suddenly stops heating may have an open high-limit switch. This safety device monitors heat near key electrical parts and interrupts power if the temperature reaches its set limit. Its 22...
Special Order
In Stock
Order now and your part arrives by Sep 26
In Stock
Order now and your part arrives by Sep 26
In Stock
Order now and your part arrives by Sep 26
Common Problems and Symptoms for MORD230B
Viewing 1 of 1
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- David from MCKINNEY, TX
- Parts Used:
- DE81-02331A
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
Two striped out screw heads
Purchased a screw extractor set from the local Ace Hardware (SpeedOut). Be sure and carefully follow the screw extractor instructions as written (counterclockwise turn). Removed old screws and replaced them with new screws supplied by PartSelect.
Was this instruction helpful to you?
Thank you for voting!