Models > ECS130 > Instructions

ECS130 Dacor Wall Oven - Instructions

Jump to:

All Instructions for the ECS130
1 - 2 of 2
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
David from MCKINNEY, TX
Parts Used:
DE81-02331A
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Two striped out screw heads
Purchased a screw extractor set from the local Ace Hardware (SpeedOut). Be sure and carefully follow the screw extractor instructions as written (counterclockwise turn). Removed old screws and replaced them with new screws supplied by PartSelect.
2 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Bob from Latrobe, PA
Parts Used:
DE81-06277A
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
the oven didn't heat up on bake
didn't know if this was going to fix it, but i ordered a bake element anyway from a very frendly and knowledgeable lady in nova scotia whom i couldn't talk into coming down here to install it for me, but when the element arrived, i removed the oven door and removed the two grates, removed 2 screws from the element in the back of the oven and pulled out the element. then hooked up the 2 wires to the new element and then had a slight problem getting the 2 screws reassembled, but got it done. pam prayed, and then baked some bread and it worked perfectly. i'm quite satisfied with one more problem solved!!! ready for the next one!!!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the ECS130
1 - 2 of 2