Models
>
ECPD227
ECPD227 Dacor Wall Oven
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
In Stock
In Stock
In Stock
In Stock
In Stock
Special Order
In Stock
Special Order
On Order
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Sarah from FORT COLLINS, CO
- Parts Used:
- DE81-03937A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
Temp sensor is failing
I did not do the repair since the part shipped was not the correct one. I have contacted Customer Service by phone and mail and nothing has been resolved.
I would, at least, like to return the incorrect part. An new one would be great but not holding out hope.
I would, at least, like to return the incorrect part. An new one would be great but not holding out hope.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from BUENA VISTA, CO
- Parts Used:
- DE81-04994A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Replaced bottom relay control panel
First disconnected power to the oven at circuit breaker box. Then, Removed top front control panel, held by four screws exposed when top oven door is opened. Was able to move control up and out of the way without disconnecting. The relay control panel is visible on the right. I was able to reach all connectors with needle nose plie
... Read more
rs and then remove the panel with needle nose to release clips and use screw driver to gentle pry up. Installed new unit by attaching back connectors and then setting panel down onto clips. Finished with attaching front connectors. Reattach front control panel.
Read less
Was this instruction helpful to you?
Thank you for voting!