Models
>
ECD230
ECD230 Dacor Wall Oven
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Manuals & Guides for ECD230
Click to downloadKeep searches simple, eg. "belt" or "pump".
This is used in oven / range as a see through heat barrier
No Longer Available
The bake element in your oven provides the heat that you cook with. If you discover that your oven is not heating up enough, not heating at all, or heating unevenly, you might have to replace the bake...
No Longer Available
In Stock
In Stock
In Stock
Special Order
In Stock
Special Order
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- David from BUENA VISTA, CO
- Parts Used:
- DE81-04994A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Replaced bottom relay control panel
First disconnected power to the oven at circuit breaker box. Then, Removed top front control panel, held by four screws exposed when top oven door is opened. Was able to move control up and out of the way without disconnecting. The relay control panel is visible on the right. I was able to reach all connectors with needle nose plie
... Read more
rs and then remove the panel with needle nose to release clips and use screw driver to gentle pry up. Installed new unit by attaching back connectors and then setting panel down onto clips. Finished with attaching front connectors. Reattach front control panel.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bob from Latrobe, PA
- Parts Used:
- DE81-06277A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
the oven didn't heat up on bake
didn't know if this was going to fix it, but i ordered a bake element anyway from a very frendly and knowledgeable lady in nova scotia whom i couldn't talk into coming down here to install it for me, but when the element arrived, i removed the oven door and removed the two grates, removed 2 screws from the element in the back of the oven
... Read more
and pulled out the element. then hooked up the 2 wires to the new element and then had a slight problem getting the 2 screws reassembled, but got it done. pam prayed, and then baked some bread and it worked perfectly. i'm quite satisfied with one more problem solved!!! ready for the next one!!!
Read less
Was this instruction helpful to you?
Thank you for voting!