Models
>
75817860
75817860 Craftsman Utility Vacuum
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 75817860
Viewing 3 of 3
Keep searches simple, eg. "belt" or "pump".
This is a genuine Craftsman replacement part. This hose combo is an attachment that can be used with a vacuum, and auger or a table saw. It helps you keep your project and your work space free of debr...
No Longer Available
This is a genuine Craftsman replacement part. This green stripe cartridge filter for 16 and 32 gallon wet/dry vacuums uses pleated paper technology instead of foam; this increases the surface area of ...
No Longer Available
Special Order
This is a genuine Craftsman replacement part. This wet/dry vacuum extension wand fits tightly on any 2-1/2 inch hose to give you better reach as you clean. The 20.5-inch wand extension is made out of ...
No Longer Available
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Gary from WILLMAR, MN
- Parts Used:
- 16928
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- 30 - 60 mins
The hose was broken - separated from the connector
I was disappointed to find the hose kit to not be correct, since the information on the site said it would work for my model. After trying various combinations of ends I decided to modify my existing connector. It had a ridge that would not let the hose coupler go on. I was able to grind that ridge off. I then fitted the connector over th
... Read more
e end, after putting waterproof adhesive on the end. I let that set up for 4 hours, then inserted the hose inside the other end. So far it is holding.
Read less
Was this instruction helpful to you?
Thank you for voting!