Models
>
75817871
75817871 Craftsman Utility Vacuum
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 75817871
Viewing 2 of 2
Keep searches simple, eg. "belt" or "pump".
This is a genuine Craftsman replacement part. This hose combo is an attachment that can be used with a vacuum, and auger or a table saw. It helps you keep your project and your work space free of debr...
No Longer Available
This is an authentic Craftsman replacement part manufactured for use with wet/dry vacuums. The special nozzle is used to provide a wider surface area for the vacuum's suction to be used when vacuuming...
No Longer Available
This is a genuine Craftsman replacement part. This wet/dry vacuum extension wand fits tightly on any 2-1/2 inch hose to give you better reach as you clean. The 20.5-inch wand extension is made out of ...
No Longer Available
This is an authentic OEM sourced part which is specially designed for use with Craftsman wet and dry vacuums. It is an identical replacement for a missing or a faulty vacuum extension that was include...
No Longer Available
This is an original Craftsman replacement part. The on/off switch is designed by the manufacturer for use in vacuums. This part is a complete switch assembly with a plastic toggle switch in a high-q...
No Longer Available
This is a genuine Craftsman replacement part that is sourced from the original manufacturer to be used with wet/dry vacuums. The attachment is used to connect to the hose's extension wand and is used ...
No Longer Available
This is an authentic Craftsman replacement part, sourced from the original manufacturer for use with shop/job site vacuums. The special filter cartridge is used to prevent dust or debris from entering...
No Longer Available
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Gary from WILLMAR, MN
- Parts Used:
- 16928
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- 30 - 60 mins
The hose was broken - separated from the connector
I was disappointed to find the hose kit to not be correct, since the information on the site said it would work for my model. After trying various combinations of ends I decided to modify my existing connector. It had a ridge that would not let the hose coupler go on. I was able to grind that ridge off. I then fitted the connector over th
... Read more
e end, after putting waterproof adhesive on the end. I let that set up for 4 hours, then inserted the hose inside the other end. So far it is holding.
Read less
Was this instruction helpful to you?
Thank you for voting!