UH30302 Hoover Upright Vacuum

This is a flat non-stretch rubber belt for a vacuum. The vacuum belt attaches to the brush roller and helps to collect dirt and debris. The belt will wear with regular use and will require replacement...

These are a genuine replacement belts designed for Hoover upright vacuums. These are main belts that driver the brushroller. It is recommended to replace these belts every 6 months to ensure optimum p...

This genuine Hoover hose is designed to work with Elite and WindTunnel vacuums. This is a black plastic stretch hose measuring 8' long. It attaches from the vacuum body housing to the extension wand o...

This authentic manufacturer approved replacement brush roll assembly is designed for use with Hoover vacuums. The spinning motion of the brush rolls picks up the dust and dirt from the floor. Over tim...

This part is a genuine Hoover replacement cord. This is a standard power cord with a two-prong North American Type A plug. It includes a cord clip on the plug. It is a black cord measuring 35' in leng...

This is a genuine Hoover-made vacuum bag. This HEPA (High Efficiency Particulate Air) bag is designed to remove over 99.97% of particles. For this reason, it is ideal for allergy and asthma sufferers....

This is an authentic OEM part designed for use in upright vacuums. This part fits onto the side of the machine and is accessed by opening the bag door. It is the final filter, which is the last air fi...

This is a genuine OEM replacement part sourced from the original manufacturer. This inlet filter is a secondary filter designed to protect the motor from dust and dirt particles. It sits below the vac...

This is a genuine Hoover-made part used on many vacuums. This wand fits onto the hose and can be used alone or can attach to any accessories such as crevice tool, turbo tool, or dusting brush. One ext...

It is a genuine item that is supplied directly from the original equipment manufacturer for use with Dirt Devil, Hoover and Royal vacuums. This is an identical replacement for a missing or damaged 2 i...

This is a genuine Hoover replacement part made for vacuums. It is designed to sit below the brush roll housing. It holds and protects the brush roll and the suction nozzle. Note that no screws are inc...

This is a genuine Hoover replacement attachment designed for Hoover vacuums. It is a gray plastic tool featuring an angled tip. This long thin attachment is ideal for small spaces and corners. It meas...