UH70211 Hoover Upright Vacuum

This is a flat non-stretch rubber belt for a vacuum. The vacuum belt attaches to the brush roller and helps to collect dirt and debris. The belt will wear with regular use and will require replacement...

These are a genuine replacement belts designed for Hoover upright vacuums. These are main belts that driver the brushroller. It is recommended to replace these belts every 6 months to ensure optimum p...

This genuine Hoover hose is designed to work with Elite and WindTunnel vacuums. This is a black plastic stretch hose measuring 8' long. It attaches from the vacuum body housing to the extension wand o...

This is a genuine OEM pre-filter designed for use with Hoover upright vacuums. This filter is located inside of the top of the dirt cup. Open it to expose the primary filter. Pull the tab on the filte...

This authentic manufacturer approved replacement brush roll assembly is designed for use with Hoover vacuums. The spinning motion of the brush rolls picks up the dust and dirt from the floor. Over tim...

This authentic Hoover filter is used in the Wind Tunnel series of vacuums. This filter works with the HEPA filter; both filters fit inside the lid of the dust cup. These exhaust filters are designed t...

This is a genuine Hoover-made part used on many vacuums. This wand fits onto the hose and can be used alone or can attach to any accessories such as crevice tool, turbo tool, or dusting brush. One ext...

This is a genuine Hoover replacement part used in their Wind Tunnel series of vacuums. This part is primarily made of plastic and includes the clear dirt cup as well as the black lower lid. This dirt ...

This is a genuine OEM replacement pedal. It is the handle release pedal, located at the bottom rear of the machine. This pedal releases the lock for the handle, so that suction is directed through the...

This is a genuine Hoover replacement part made for vacuums. It is designed to sit below the brush roll housing. It holds and protects the brush roll and the suction nozzle. Note that no screws are inc...

This is a genuine Hoover replacement attachment designed for Hoover vacuums. It is a gray plastic tool featuring an angled tip. This long thin attachment is ideal for small spaces and corners. It meas...

This is an authentic replacement part manufactured for use with upright vacuums. The switch is used to relay electricity from the power cord to the motor. Switches can wear out over time causing the m...