This is a genuine OEM sourced replacement part that is designed for use with Dyson vacuums. Switches are a commonly replaced part in power equipment, handling on/off operations. Over time they will we...
This is an original Dyson replacement part manufactured for use with upright vacuums. This is the motor to clutch belt, it is important to clean the clutch, and motor shaft when replacing the belt, th...
This iron hose assembly is an OEM direct from Dyson. Compatible with the DC14 Upright Vacuum, this durable plastic item is sold individually. The assembly is designed to move the captured debris to th...
The internal hose attaches to the iron/titanium cleaner head. This is an authentic part from Dyson for use in upright vacuums. This item is available as an individual replacement part. A screwdriver m...
This is a high-quality replacement for a missing or a faulty o-ring that was installed on a new unit. It is designed for use with Dyson upright vacuums. The part helps to provide an air-tight seal for...
This is an authentic OEM component from Dyson. The clutch assembly is made for several upright vacuum motors. The assembly is manages the vacuum drive system and brush, and is sold individually. A scr...
This is a genuine OEM sourced part is specially designed for Dyson upright vacuums. It is an important component that helps to support the soleplate. Over time it may wear out, get damaged or lost eve...
This HEPA filter is an OEM direct from Dyson and is specifically designed for use with an upright vacuum. This part is a permanent lifetime filter and is not meant to be removed or cleaned. If this pa...
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gary
February 6, 2022
Would like to purchase a new electric cord for my dc14. Mine got a short in the cord .
For model number DC14
Hello Gary, Thank you for your inquiry. We have researched the model number you have provided and show the power cord as part# FIX12026481. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Hello William, thank you for the question. Firstly, remove the canister from the vacuum. The two T15 Torx screws holding the switch cover to the vacuum are then removed after detaching the telescoping vacuum wand. The two plastic clips holding the switch cover to the vacuum need to be pushed outward in the second stage. In the third step, take off the vacuum's switch cover. Next, firmly extract the two wires from the power switch while holding them by their white plastic covers. When reassembly occurs, the terminals will only fit one way. Only one wire is long enough to extend to the switch's remote terminal. We hope that helps!
Was this helpful?
Thank you for voting!
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
