Models
>
13BX60TG766
13BX60TG766 (2007) Troy-Bilt Lawn Tractor
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
$6.51
Designed for use in MTD, Yard Machine, Troy-Bilt, Yard-Man, and Craftsman machines, this OEM approved Shear Pin fits a variety of models. For full compatibility, please see the "Model Cross Reference ...
In Stock
Order now and your part arrives by Apr 10
$6.51
This bow tie cotter pin fits snow blowers, as well as other gardening tools. The pin helps secure the auger to the shaft on a snow blower. Due to constant wear, this is a commonly replaced part. Tip: ...
In Stock
Order now and your part arrives by Apr 10
This carriage bolt fits a variety of tools and is sold individually. The square area under the head of the bolt is created to fit into a square hole in your tool. The hole makes sure to restrain the b...
In Stock
Order now and your part arrives by Apr 10
$6.51
This nut is fit for lawn and garden equipment and is used to resist loosening when properly threaded onto a bolt. The nut is sold individually. The diameter of the nut is 5/16 inches and the thread si...
In Stock
Order now and your part arrives by Apr 10
This part contains one steering pinion gear for a lawn tractor. It is part of the steering mechanism and is highly prone to wear and tear. If this pinion gear becomes stripped it can cause steering to...
In Stock
Order now and your part arrives by Apr 10
This is a manufacturer-approved replacement flange bearing for a lawn tractor. It is sold individually. The function of this part is to help secure the axle assembly to the pivot axle. It also allows ...
In Stock
Order now and your part arrives by Apr 10
$29.98
This is a lock ball joint assembly for your lawn tractor. The ball joint assembly connects to the pitman arm and the drag link, and is a part of the steering mechanism on your machine. This part is 7/...
In Stock
Order now and your part arrives by Apr 10
In Stock
Order now and your part arrives by Apr 10
This lock nut is used for lawn and garden equipment, and is sold individually. This nut resists loosening when it is correctly threaded onto a bolt in your tool. The measurements are: the diameter of ...
In Stock
Order now and your part arrives by Apr 10
This part includes one hex flange bearing for a lawn tractor. It is sourced directly from the original manufacturer. Its purpose is to connect the steering shaft to the frame of the lawn tractor. It h...
In Stock
Order now and your part arrives by Apr 10
$18.07
To keep your equipment running smoothly for the season, you will need to replace your oil filter. This is an OEM oil filter and it is sold individually. The oil filter helps to remove contaminants fro...
In Stock
Order now and your part arrives by Apr 10
$42.85
Genuine OEM Idler Mandrel Pulley Kit which includes: pulley, spacer/washer and a bushing. This part spins the blade on the mower deck of the tractor. The bearing for this pulley is not sold separately...
In Stock
Order now and your part arrives by Apr 10
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- TERRY from OAK CREEK, WI
- Parts Used:
- 954-0468
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- More than 2 hours
i NEEDED A DRIVE BELT FOR MY RIDING MOWER
1) DON'T ORDER FROM THESE IDIOTS.
2) THEY SENT THE WRONG BELT
3) THEY HAVE A CUSTOMER -NO- SERVICE NUMBER.
4) CAN'T GET A GOODS RETURN ONLINE
2) THEY SENT THE WRONG BELT
3) THEY HAVE A CUSTOMER -NO- SERVICE NUMBER.
4) CAN'T GET A GOODS RETURN ONLINE
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Patrick from Northville, NY
- Parts Used:
- 941-0656A
- Difficulty Level:
- Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Pliers, Screw drivers, Socket set, Wrench set
Yardman / MTD wouldn't steer left, makes a popping and grinding noise when turning.
To disconnect the steering shaft to replace the bearing, there is a #3 Philips head screw on the underside of the deck which needs to be taken out. Chances are it hasn't been replaced before, so it is likely very tight. I ended up dropping the deck to allow for more room but it could probably be done with the deck in place the way I had t
... Read more
o do it. I had someone hold the steering wheel up top (not undoing the 13mm bolt holding the steering wheel in) and tried to unscrew the Philips, even after heating it with a torch still stripped out. The only way I could get the screw out was to take a pair of Vice Grips adjusted extremely tight to the outside of the screw and put the torch on it to heat it again. Then, turn the steering wheel to the left and when the Vice Grips get caught on the bottom of the mower, it will unthread the steering wheel from the screw. After the screw and washer are out *TAKE NOTE OF THE ORIENTATION OF THE WASHER*, I went to the hardware store and replaced the screw with a bolt that was 5/16 - 18 x .750 which was the closest length they had, took out the worn out bearing, popped in the new one, reinstalled the washer and bolt, then the deck. Even if you get the philips screw out without using Vice Grips, I would still recommend replacing it with a bolt.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Danny from MONROE, VA
- Parts Used:
- 747-04269A
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Socket set, Wrench set
Could not get deck level with previous deck rod ordered
Removed old deck rod, installed correct new deck rod
Was this instruction helpful to you?
Thank you for voting!