Models
>
TB514CS
TB514CS (41ADT51G966) Troy-Bilt Trimmer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for TB514CS
Viewing 2 of 2_WW_1.gif "Page A Diagram and Parts List for 41ADT51G966 Troy-Bilt Trimmer")
_WW_2.gif "Page B Diagram and Parts List for 41ADT51G966 Troy-Bilt Trimmer")
Keep searches simple, eg. "belt" or "pump".
$21.24
This bump knob assembly fits lawn and gardening tools, usually trimmers. This part bumps on the ground to advance the cutting line from the spool. With time and use, this part can wear out easily. It ...
In Stock
Order now and your part arrives by Apr 23
$11.95
This is a genuine OEM replacement throttle trigger (red). The throttle trigger is responsible for managing the speed of the engine. The throttle cable attaches to the trigger, which connects to the th...
In Stock
Order now and your part arrives by Apr 23
Special Order
$30.08
This spool is for line trimmers.
Spool houses the cutting line and fits inside the cutting head to cut grass and weeds.
Wear work gloves to protect your hands when installing this part.
In Stock
Order now and your part arrives by Apr 23
$17.25
Genuine OEM replacement part, this item is sold individually. This spring is used on all of the trimmers listed below. It is installed between the inner reel and the outer spool assembly. Its purpose...
In Stock
Order now and your part arrives by Apr 23
$8.91
This is an authentic manufacturer-sourced component which is specially designed for Craftsman trimmers. Its purpose is to filter out dust and debris from contaminating the carburetor and engine, unfor...
Special Order
$36.98
This is a genuine Craftsman replacement part that is sourced from the original manufacturer to be used with trimmers. The plastic reel is part of the cutting head assembly and is used to store the tri...
Special Order
$15.95
This switch is used on a variety of trimmers, blowers and other similar gardening equipment. This switch controls the on and off operations of your tool. Switches have mechanical internals, which degr...
In Stock
Order now and your part arrives by Apr 23
$96.65
This is a genuine OEM sourced replacement part used on gas trimmers/edgers. The purpose of this part is to mix air and gas before the fuel mix goes to the engine. If the engine wont start and the tan...
Special Order
This is a manufacturer approved replacement cover designed for use with gas string trimmers. The purpose of this cover is to secure air filter element which is sold separately and it protect internal ...
No Longer Available
$12.79
This is a genuine manufacturer approved replacement mulching door torsion spring designed for use with handheld trimmers/edgers. This spring helps the throttle trigger to retract. It is made out of me...
In Stock
Order now and your part arrives by Apr 23
$33.92
The housing is sourced from the original manufacturer for use with Craftsman gas powered trimmers. This part is a kit that is used to house the throttle trigger. The kit includes the housing, hardware...
In Stock
Order now and your part arrives by Apr 23
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Alan
August 15, 2023
can not figuer out how to wind the string.
For model number TB514CS
Hello Alan, thank you for contacting us. To wind the string, you may need to follow these instructions:
Find the two holes on top of the inner reel and insert both ends of the line into one hole. Pull the line through until two to three inches remain, then loop your short ends over into the other hole and pull the long ends to close the loop. Wind the line around the reel and the direction of the arrow on top, apply some pressure to wind it evenly; when you have about six inches left, push each string end into the holding slots marked point. Glad to be of assistance!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Michael
November 8, 2021
I was using the trimmer to trim and the line bump head stop turning while it was still running. How do I get this fixed. It is my favorite trimmer. The trimmer line bump head will not turn now while running.
For model number TB514CS
Hello Michael, Thank you for the question. This is normally an indication there is damage to the Spool or the Bump Head. We suggest checking or replacing both parts. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Related Parts:
Common Problems and Symptoms for TB514CS
Viewing 1 of 1
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Lost the cover
Took 2 screws off and put the new one on
Was this instruction helpful to you?
Thank you for voting!