Models
>
TB22EC
TB22EC (41ADT22C966) Troy-Bilt Trimmer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for TB22EC
Viewing 2 of 2_WW_1.gif "Engine Assembly Diagram and Parts List for 41ADT22C966 Troy-Bilt Trimmer")
_WW_2.gif "General Assembly Diagram and Parts List for 41ADT22C966 Troy-Bilt Trimmer")
Keep searches simple, eg. "belt" or "pump".
$35.86
It is an authentic manufacturer-sourced replacement part that i supplied for Craftsman trimmers. The function of a carburetor is to mix the air and the gas into a highly combustible mix before it goes...
In Stock
$13.42
This bump knob assembly fits lawn and gardening tools, usually trimmers. This part bumps on the ground to advance the cutting line from the spool. With time and use, this part can wear out easily. It ...
In Stock
This is a genuine OEM replacement throttle trigger (red). The throttle trigger is responsible for managing the speed of the engine. The throttle cable attaches to the trigger, which connects to the th...
No Longer Available
$13.77
This is an authentically sourced fuel tank assembly, including the fuel lines, fuel cap, fuel filter, and screws needed for assembly. This fuel tank assembly is for trimmers, and is where the fuel is ...
In Stock
$24.40
This spool is for line trimmers.
Spool houses the cutting line and fits inside the cutting head to cut grass and weeds.
Wear work gloves to protect your hands when installing this part.
In Stock
In Stock
In Stock
In Stock
In Stock
Special Order
In Stock
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Vibhor
August 28, 2022
Tb22 engine starts and the cutting line rotates but when i try to rev it to have more speed for cutting, the engine cuts out
For model number TB22EC
Hello Vibhor, thank you for asking! First of all, try adjusting the two adjustment screws near the speed control by rotating them counterclockwise. Sometimes due to vibration the engine losses proper adjustment and requires manual readjustment. If this does not help then you need to clean the air filters and the carburetor. Next is to check the throttle trigger (part number: FIX11839169), the red part that controls the speed, and make sure it has not deteriorated. If it has then you need to replace it. If the issue persists then we would recommend replacing the carburetor (part number: FIX9119300). I hope this will help. Please feel free to contact us if you need any assistance, our customer service is here to help seven days a week.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Related Parts:
Common Problems and Symptoms for TB22EC
Viewing 1 of 1
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Erik from ROBERTSDALE, AL
- Parts Used:
- 753-06183
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Fuel line broke
Removed the two screws holding the fuel tank to the main unit. Removed the two fuel lines and any stuck on rubber. Installed and installed two screws to mount the new tank. Slid fuel lines on their respective connectors. Done.
Was this instruction helpful to you?
Thank you for voting!
string trimmer would not start
emptied fuel from tank. pulled off the 2 fuel lines from the carburetor.opened the air cleaner door. removed the 2 torque screws that hold on the carburetor. removed the carburetor and air cleaner gasket. installed new carburetor and gasket and put back and tightened the 2 torque screws. closed air cleaner door and pushed the fuel lines o
... Read more
nto the new carburetor.put some fuel in the tank. started the trimmer. runs great.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from GLENN HEIGHTS, TX
- Parts Used:
- 753-06183
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Super Easy Install
The fuel tank is held in place by 2 screws. Simply take the screws off and pull off the fuel lines.
Take the new fuel tank. Put it in place and screw the 2 screws in to hold the fuel tank.
Connect the fuel lines and you're done.
This is the easiest repair I have ever done on any of my lawn equipment.
Take the new fuel tank. Put it in place and screw the 2 screws in to hold the fuel tank.
Connect the fuel lines and you're done.
This is the easiest repair I have ever done on any of my lawn equipment.
Was this instruction helpful to you?
Thank you for voting!