RY34442 Ryobi Trimmer - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- MIKE from LOXAHATCHEE, FL
- Parts Used:
- 309375002
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
No run on start up. sputters
Remove carb cover, remove 2 t25 torx head screws. ( they are loctite in so they may be difficult). flip up carb, install new carb. swap gas fill and return lines to carb. choke and start, go to work.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Nathan from Fayetteville, AR
- Parts Used:
- 308470056
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
Upper shaft was bent
Watch a video, great instructions:
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- TFRANKLIN from MICANOPY, FL
- Parts Used:
- 308470056
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Nutdriver, Pliers, Wrench (Adjustable)
The new boom had to be modified where it would work.
Once I was able to see the problem. I had to make modifications so it could be used. It took awhile to figure out the problems. With a drill motor and metal bit I was able to get the boom where I could use it.
Was this instruction helpful to you?
Thank you for voting!