865R (401000001) Ryobi Trimmer

This is a primer and hose assembly, and it is used on various lawn equipment. The assembly comes with two parts. The first is the hose which is almost 5 inches long, and less than a 1/4 inch thick. Th...

This is a fuel return line, and it is used with various outdoor lawn equipment. Fuel travels through the return line into the carburetor, and from the primer bulb/pump into the fuel system. The line r...

This is a genuine OEM replacement part. it is sold individually. The Bump Head Knob Assembly is the part of the trimmer that you bump on the ground to advance the cutting line from the spool. Because ...

This is a spark plug, and it is used in a variety of outdoor equipment. The spark plug ignites the fuel in the engine by producing a small spark. This part is RDJ7Y, meaning it is a resistor type, wit...

The spring fits between the outer spool & eyelet assembly and the inner reel. It is a genuine item that is supplied by the original equipment manufacturer for use with trimmers made by Ryobi, Troy-Bil...

This is an authentic part which is sourced from original equipment manufacturer. It is generally used on handheld trimmers/edgers. This nut is designed to secure cutting blade to the trimmer shaft. Pl...

The inner reel goes between the bump head knob and the outer spool & eyelet. It is made of plastic and is sold individually. The reel is a genuine replacement part for trimmers made by MTD, Ryobi, Tro...

This throttle trigger spring is an OEM part guaranteed to fit the trimmers listed below. It attaches to the throttle trigger (part # 791-181807). When dismantling the handle, be sure to take detailed ...

The retaining washer fits between the blade driver and the spool shaft. It is available individually and is made out of metal. This is a genuine replacement part sourced from the original manufacturer...

This is an original replacement part manufactured for use with trimmers. The metal blade assembly attaches to the trimmer guard with two nuts and bolts, the hardware will come with the blade assembly....

This is an original replacement part manufactured for use with trimmers. This coated steel blade is used to get more use out of trimmers. The strong blade is used to cut tall grass and brush when clea...

This is a genuine Ryobi, Troy-Bilt, Bolens, and MTD replacement part for use in blowers and trimmers. The bump head attaches to the drive shaft. A strap wrench may be needed during the replacement of ...