765R Trimmer

This is a primer and hose assembly, and it is used on various lawn equipment. The assembly comes with two parts. The first is the hose which is almost 5 inches long, and less than a 1/4 inch thick. Th...

This fuel line filters the fuel in the tank as it pushes into the carburetor by the primer bulb. If your carburetor is not getting fuel, ports get clogged, or the fuel line is leaking, then replacing ...

This is a fuel return line, and it is used with various outdoor lawn equipment. Fuel travels through the return line into the carburetor, and from the primer bulb/pump into the fuel system. The line r...

This bump knob assembly fits lawn and gardening tools, usually trimmers. This part bumps on the ground to advance the cutting line from the spool. With time and use, this part can wear out easily. It ...

This air filter fits a variety of power tools. The filter keeps dirt, debris and other small particles from entering the carburetor and engine, which can cause internal engine damage. If your filter i...

This spool is for line trimmers. Spool houses the cutting line and fits inside the cutting head to cut grass and weeds. Wear work gloves to protect your hands when installing this part.

Genuine OEM replacement part, this item is sold individually. This spring is used on all of the trimmers listed below. It is installed between the inner reel and the outer spool assembly. Its purpose...

This is a spark plug, and it is used in a variety of outdoor equipment. The spark plug ignites the fuel in the engine by producing a small spark. This part is RDJ7Y, meaning it is a resistor type, wit...

This is an authentic part that is supplied directly by the original equipment manufacturer for Craftsman trimmers. The trigger allows you to control engine speed, which in turn permits you to safely c...

This is an original part from Craftsman for use with Trimmers and Cultivators. The carburetor mount gasket seals the space between the carburetor mount and the engine. The most common reasons for repl...

This is an OEM replacement part from Ryobi. The retainer is used in trimmers, and fits between the spring and the outer spool assembly. It helps to hold the spool in place. This retainer is sold as an...

This item is a genuine replacement part that has been OEM sourced to be used with trimmers from Ryobi, Troy-Bilt, Yard-Man, Bolens, MTD, and Yard Machines. The reel and line is part of the cutting hea...