Models > RY251PHVNM > Instructions

RY251PHVNM (095333107) Ryobi Trimmer - Instructions

Jump to:

All Instructions for the RY251PHVNM
1 - 2 of 2
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Henry J from CHESNEE, SC
Parts Used:
307156001
Difficulty Level:
Very Difficult
Total Repair Time:
30 - 60 mins
No spark
It didn't, After 2 new sparkplugs 2 coils iand a fly wheel and coil set using a business card. And is killed switch disconnected? Still no spark and I don't have the clue and I'm amechanic.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
RAYMOND from El Dorado, AR
Parts Used:
307156001
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Socket set
The trimmer would not start.
Pulled trimmer apart, found plastic shims on coil broken. This allowed the coil to drop onto the flywheel, which stopped the crank and in turn sheared the flywheel key. If the key shears it will throw the timing off and the engine will not start. The key is made into the flywheel so it had to be replaced. The trimmer runs again.
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the RY251PHVNM
1 - 2 of 2